DURABIO™ D5360
- Chemical Family
- Polycarbonate (PC)
DURABIO™ D5360 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, cosmetic containers, and stationery. This grade is characterized by good flow and is suitable for injection mold.
Product families
Applications
- Consumer Goods — Furniture
- Medical Devices & Assemblies
- Housings & Enclosures
Product Families
- Polycarbonates
Other characteristics
- Brand
- DURABIO
- Polymer Name
- Polycarbonate (PC)
- Labeling Claims
Bio-based, Bisphenol A-free, Environmentally Friendly; Bio-based; Bisphenol A-free; Environmentally Friendly
- Flexural Modulus
- 2,100.0 MPa
- Processing Methods
- Injection Molding
- Color
- Black
- Custom
- Markets
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Technology
- Plastics
- Packaging Type
- Bags
- Material Features
- Amorphous
- Ductile
- Durable
- Excellent Transparency Properties
- Good Flow
- Good Mechanical Properties
- Good Optical Properties
- Good Scratch Resistance
- HIGHLIGHTS
Highly transparent.; High gloss and deep piano black available. And other premium colors such white, red, orange, blue, etc. are possible.; Excellent mechanical properties.; Superb weather-resistance and UV-resistance.; Ductility with good impact resistance.; Good scratch resistance.; Biobased content certified by USDA, DIN CERTCO, NEN and JBPA.
- Storage Information
Do not store outdoors. Keep dry at ambient temperature.; Avoid humid environment, heat and direct sunlight.; The material needs to be pre-dried before processing.
- Packaging Information
DURABIO is typically packed in 25kg paper bags with polyethylene inner liner.
- Applications Information
Drying Condition:; Pre-dry is necessary.; Please dry until moisture content can be less than 500 ppm (less than 0.05%) prior to using. It can be carried out as follows:; More than 7 hours; The maximum recommended temperature must not be exceeded as this may cause aggregation or other defects.; Start-up:; Purge machine completely with DURABIO or other acceptable purging material.; DURABIO is not compatible with conventional polycarbonate, purge machine completely if conventional polycarbonate resin was in the previously in the machine.
- Certifications and Compliance
- DIN CERTCO
- Japan BioPlastics Association (JBPA)
- NEN Bio-based Content
- USDA Certified
- Plastics and Elastomers End Uses
- Cell Phone Frame
- Cell Phone Housing
- Cosmetics Bottles
- Display Panel
- Lenses
- Light Guides
- Medical Device Housings
- Optical Film
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 64.0 | MPa | ISO527 |
| Elongation (at break) | 130.0 | % | ISO527 |
| Flexural Modulus | 2100.0 | MPa | ISO178 |
| Flexural Strength | 94.0 | MPa | ISO178 |
| Charpy Impact Strength (Notched, at 23°C) | 9.0 | kJ/m² | ISO179-1/1eA |
| Charpy Impact Strength (Unnotched, at 23°C) | No Break | kJ/m² | ISO179-1/1eU |
| Tensile Modulus | 2300.0 | MPa | ISO527 |
Table 2 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Total Light Transmittance (3mmt) | 92.0 | % | ISO13468 |
| Density | 1.31 | g/cm³ | ISO1183 |
| Water Absorption (at 23°C, 24hr) | 0.2 | wt% | MCC Method |
| Mold Shrinkage | 0.3 - 0.5 | % | MCC Method |
| Melt Volume Flow Rate (at 230°C, 2.16kg) | 10.0 | cm³/10min | ISO1133 |
| Melt Mass Flow Rate (at 230°C, 2.16kg) | 13.0 | g/10min | ISO1133 |
Table 3 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.80MPa) | 82.0 | °C | ISO75-1, ISO75-2 |
| Heat Deflection Temperature (at 0.45MPa) | 92.0 | °C | ISO75-1, ISO75-2 |
| Coefficient of Liner Expansion (MD, at -20°C to 80°C) | 7.30 x 10⁻⁵ | 1/°C | ISO11359-2 |
| Coefficient of Liner Expansion (TD, at -20°C to 80°C) | 7.30 x 10⁻⁵ | 1/°C | ISO11359-2 |
Table 4 of 4
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Hopper Area Temperature | approx. 50 | °C |
| Barrel Temperature (Rear Hopper side) | 220 - 240 | °C |
| Barrel Temperature (Center) | 220 - 250 | °C |
| Barrel Temperature (Front Nozzle side) | 220 - 250 | °C |
| Nozzle Temperature | 220 - 250 | °C |
| Mold Temperature | 60 - 100 | °C |
| Screw Speed (Refill) | 30 - 60 | rpm |
| Back Pressure (Refill) | 10 - 25 | MPa |
| Decompression (Refill) | 1 - 4 | mm |
| Injection Rate (Injection) | 10 - 60 | cm³/sec |
| Holding Pressure (Injection) | 40 - 100 | MPa |
| Holding Time (Injection) | 3 - 10 | sec |
