DURABIO™ DT6010
- Chemical Family
- Polycarbonate (PC)
DURABIO™ DT6010 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high-impact strength. It is suitable for injection mold.
Product families
Applications
- Consumer Goods — Furniture
- Interior
- Medical Devices & Assemblies
- Housings & Enclosures
Product Families
- Polycarbonates
Other characteristics
- Brand
- DURABIO
- Polymer Name
- Polycarbonate (PC)
- Labeling Claims
Bio-based, Bisphenol A-free, Environmentally Friendly; Bio-based; Bisphenol A-free; Environmentally Friendly
- Flexural Modulus
- 2,200.0 MPa
- Processing Methods
- Injection Molding
- Color
- Black
- Custom
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Technology
- Plastics
- Packaging Type
- Bags
- Material Features
- Amorphous
- Ductile
- Durable
- Good Mechanical Properties
- Good Scratch Resistance
- Good Weather Stability
- High Gloss
- Impact Resistance
- HIGHLIGHTS
High gloss and deep piano black available.; Other premium colors such as white, red, orange, blue, etc. are possible; Excellent mechanical properties; Superb weather-resistance and UV-resistance; Ductility with good impact resistance; Good scratch resistance; Bio-based material
- Storage Information
Do not store outdoors. Keep dry at ambient temperature.; Avoid humid environment, heat and direct sunlight.; The material needs to be pre-dried before processing.
- Packaging Information
DURABIO is typically packed in 25kg paper bags with polyethylene inner liner.
- Applications Information
Drying Condition:; Pre-dry is necessary.; Please dry until moisture content can be less than 500 ppm (less than 0.05%) prior to using. It can be carried out as follows:; More than 7 hours; The maximum recommended temperature must not be exceeded as this may cause aggregation or other defects.; Start-up:; Purge machine completely with DURABIO or other acceptable purging material.; DURABIO is not compatible with conventional polycarbonate, purge machine completely if conventional polycarbonate resin was in the previously in the machine.
- Certifications and Compliance
- USDA Certified Biobased
- Plastics and Elastomers End Uses
- Automotive Interior Parts
- Electrical Housing
- Electronic Housing
- Medical Device Housings
- Stationary Supplies
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 2200.0 | MPa | ISO527 |
| Tensile Strength | 63.0 | MPa | ISO527 |
| Elongation (at break) | 120.0 | % | ISO527 |
| Flexural Modulus | 2200.0 | MPa | ISO178 |
| Flexural Strength | 90.0 | MPa | ISO178 |
| Charpy Impact Strength (Notched, at 23°C) | 60.0 | kJ/m² | ISO179-1/1eA |
| Charpy Impact Strength (Unnotched, at 23°C) | No Break | kJ/m² | ISO179-1/1eU |
Table 2 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.3 | g/cm³ | ISO1183 |
| Melt Volume Flow Rate (at 230°C, 2.16kg) | 8.0 | cm³/10min | ISO1133 |
| Melt Mass Flow Rate (at 230°C, 2.16kg) | 9.0 | g/10min | ISO1133 |
Table 3 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.80MPa) | 88.0 | °C | ISO75-1, ISO75-2 |
| Heat Deflection Temperature (at 0.45MPa) | 100.0 | °C | ISO75-1, ISO75-2 |
Table 4 of 4
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Hopper Area Temperature | approx. 50 | °C |
| Barrel Temperature (Rear Hopper side) | 220 - 240 | °C |
| Barrel Temperature (Center) | 220 - 250 | °C |
| Barrel Temperature (Front Nozzle side) | 220 - 250 | °C |
| Nozzle Temperature | 220 - 250 | °C |
| Mold Temperature | 60 - 100 | °C |
| Screw Speed (Refill) | 30 - 60 | rpm |
| Back Pressure (Refill) | 10 - 25 | MPa |
| Decompression (Refill) | 1 - 4 | mm |
| Injection Rate (Injection) | 10 - 60 | cm³/sec |
| Holding Pressure (Injection) | 40 - 100 | MPa |
| Holding Time (Injection) | 3 - 10 | sec |
