SHIKOH™ UT-7792
- CASE Ingredients Features
- Excellent AdhesionGood ElasticityGood ElongationGood ToughnessImproved FlexibilityNon-Yellowing GradeRadiation CurableWater Resistance
- Chemical Family
- Urethane Acrylates
SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Binder & ResinOligomer
Other characteristics
- Brand
- SHIKOH™
- Compatible Substrates & Surfaces
- Metal
- Markets
- Adhesives & Sealants
- Consumer Goods
- Electrical & Electronics
- Paints & Coatings
- Appearance
- White wax like (clear viscous liquid at 60°C)
- Shelf LIfe
- 6 Months
- Soluble In
- Oligomer 100%
- Cure
- Radiation Cure
- Technology
- CASE Ingredients
- Plastics
- Characteristic
Bio-based UV-curable Resin (urethane acrylate type); Soft-elastic, High elongation; Suitable for adhesion bond and metalizing undercoat with monomers; Non-yellowing
- Labeling Claims
- Bio-based
- Health Precautions
Caution should be taken to avoid contact with skin, eyes and clothing. In case of contact with skin, immediately wash with soap and water.
- Material Features
- Good Adhesion
- Good Elongation
- Good Non-Yellowing Properties
- High Elasticity
- Storage Information
SHIKOH™ urethane acrylate oligomers should be stored at temperatures below 35°C, should be kept away from direct sunlight or fire and other such conditions as polymerization reaction is caused by.. Storage should be in epoxy coating steel containers. Headspace should be present in storage cans to support the oxygen requirements of the inhibitors, which have been added to enhance storage life.
- Chemical Inventories
- TSCA (USA)
- Coating End Applications
- Radiation Curable Coating
- Undercoat
- Certifications and Compliance
- California Proposition 65
- REACH (Europe)
- Plastics and Elastomers Functions
- Resin
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Pencil Hardness (РЕТ) | max. 68 | — |
| Glass Transition Temperature (Tg) | -40 | °C |
| Tensile Strength | 8.7 | N/mm² |
| Elongation | 7 | % |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Functionality | 2 | — | — |
| Molecular Weight | 13000 | — | Gel permeation chromatography |
| Biomass Ratio | 71 | % | — |
