Duro-Shield™ 10 Acrylic Roof Coating
- Chemical Family
- Acrylics & Acrylates
Duro-Shield™ 10 Acrylic Roof Coating is a 100% acrylic elastomeric roof coating formulated with a bleed blocker to help prevent bleed-through of underlying materials. It is designed to seal and protect various substrates when applied per the Duro-Shield Acrylic Roof Coating Installation Guide.
Product families
- Protective Coatings
Other characteristics
- Brand
- Duro-Shield
- Features
- Good Sealant Properties, High Elasticity
- Product Type
- Elastomeric Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
Elastomers & Rubbers, Metal, Plastics, Polyvinyl Chloride (PVC), Wood
- Odor
- Non-Descript
- Usage
Duro-Shield 10 Acrylic Roof Coating can be used on the following roof substrates, after surface preparations have been completed:; Single-ply membranes:; Metal; Mineral and granule-surfaced built up (BUR) and modified bitumen; Smooth-surfaced built up (BUR) and modified bitumen; Wood; Duro-Shield 10 Acrylic Roof Coating cannot be used over TPO (thermoplastic polyolefin) whether it is primed or not.
- Color
- White
- Gloss
- Low Sheen
- Resin
- Acrylic Emulsion
- Cleanup
Uncured product may be removed by wiping with warm water, soap and a clean cloth.. Application equipment should be cleaned immediately after use with warm water, soap and a clean cloth.
- Ordering
- 5-gallon pails (Item #4022)
- 55-gallon drums (Item #4023)
- 250-gallon totes (Item #4024)
- Precaution
Wear proper personal protective equipment, such as gloves and eye protection, per the SDS.; Use only in well-ventilated areas and avoid breathing vapors.; Keep container closed when not in use.; Do not expose closed containers to extreme heat.; Keep away from children.
- Installation
- General
- Substrate Preparation
- Cleaning Procedures
- Seam Treatment
- Priming
- Coating
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Application Methods
- Brush
- Roller
- Spray
- Storage and Handling
Protect product from freezing.; Product must not be shipped in temperatures less than 40°F (5°C).; Store product between 60°F (16°C) and 80°F (27°C), out of direct sunlight, for maximum shelf life. Shelf life is one year in an unopened container, from date of manufacture, when following these recommended storage procedures.
- Ready to Use Product Features
- Good Sealant Properties
- High Elasticity
- Compatible Substrates and Surfaces
- Elastomers & Rubbers
- Metal
- Plastics
- Polyvinyl Chloride (PVC)
- Wood
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry Time Touch (75°F, 50% relative humidity) | 1 - 2 | hours |
| Dry Time Recoat (75°F, 50% relative humidity) | 24.0 | hours |
| Dry Time Full Cure (75°F, 50% relative humidity) | 5 - 7 | days |
| Flash Point | min. 212 | °F |
| Solar Reflectance | 0.838 | — |
| Thermal Emittance | 1.05 | — |
| Total Solids (by Weight) | 63.7 | % |
| Viscosity (75°F) | 120 - 125 | KU |
| VOC Content | 49.5 | g/L |
| Weight | 56.75 | lb./5-gallon |
