Duro-Shield™ Silicone Roof Coating
- Chemical Family
- Silicones
Duro-Shield™ Silicone Roof Coating is a silicone-based single-part roof coating that creates a barrier that is resistant to natural weathering, is durable, breathable, watertight and weatherproof. It is designed to seal and protect various substrates when applied per the Duro-Shield Silicone Roof Coating Installation Guide. Duro-Shield Silicone Roof Coating is manufactured from durable inorganic silicone resins, reflective pigments and silane adhesion promoters.
Product families
Applications
- Waterproofing & Weatherproofing
Product Families
- Protective Coatings
Other characteristics
- Brand
- Duro-Shield
- Features
Breathable, Durable, Good Sealant Properties, Good Weather Stability
- Product Type
- 1K (1 component) Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
Concrete, Elastomers & Rubbers, Masonry, Metal, Plastics, Polyvinyl Chloride (PVC), Wood
- Usage
Duro-Shield Silicone Roof Coating can be used on the following roof substrates, after surface preparations have been completed:; Single-ply membranes:; Mineral and granule-surfaced built up (BUR) and modified bitumen; Smooth-surfaced built up (BUR) and modified bitumen; Spray-applied polyurethane foam; Aged galvanized metal; Concrete; Wood
- Color
- Grey
- Tan
- White
- Cleanup
Uncured product may be removed with virgin mineral spirits. Do not use water. Application equipment should be cleaned immediately after use with virgin mineral spirits. Do not use water.
- Markets
- Building & Construction
- Ordering
Approximate coverage rate per gallon: 100 square feet at 16 wet mils.; 5-gallon pail white (Item #4195); 55-gallon drum white (Item #4196); 5-gallon pail tan (Item #4195B); 55-gallon drum tan (Item #4196B); 5-gallon pail gray (Item #4195G); 55-gallon drum gray (Item #4196G)
- Precaution
Read Safety Data Sheets (SDS) prior to using. SDS can be found on the Duro-Last website.; Wear proper personal protective equipment, such as gloves and eye protection, per the SDS.; Use only in well-ventilated areas and avoid breathing vapors.; Keep container closed when not in use.; Do not expose closed containers to extreme heat.; Keep away from children.
- Installation
- General
- Substrate Preparation
- Cleaning Procedures
- Seam Treatment
- Priming
- Coating
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Energy Efficiency
- P1 - Results Pending.
- Application Methods
- Brush
- Roller
- Spray
- Storage and Handling
Store product tightly closed in a dry, cool and wellventilated place.; Keep out of direct sunlight.; Shelf life is two years in an unopened container, from date of manufacture printed on product, when following these recommended storage procedures.
- Ready to Use Product Features
- Breathable
- Durable
- Good Sealant Properties
- Good Weather Stability
- Compatible Substrates and Surfaces
- Concrete
- Elastomers & Rubbers
- Masonry
- Metal
- Plastics
- Polyvinyl Chloride (PVC)
- Wood
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cure | 2 - 4 | hours per coat | — |
| Elongation (73.4°F) | 207.0 | % | ASTM D 2370/D 6694 |
| Elongation (0°F) | 266.0 | % | ASTM D 2370/D 6694 |
| Low Temperature Flexibility | Pass | — | ASTM D 522 Method B |
| Permeance | 5.3 | perms | ASTM E 96 Procedure B |
| Solids by Volume | 94.0 | % | ASTM D 2697 |
| Solids by Weight | 96.0 | % | ASTM D 1644 |
| Tear Resistance | 22.0 | lbf/in | ASTM D 624 |
| Tensile Strength (73.4°F) | 294.0 | psi | ASTM D 2370/D 6694 |
| Tensile Strength (0°F) | 366.0 | psi | ASTM D 2370/D 6694 |
| Viscosity | 47400.0 | cps | ASTM D 2196 |
| VOC Content | 3.97 | % | EPA 24 |
