Gryphin Co. Gryphin G-2216
- Chemical Family
- Epoxy & Epoxy Derivatives
Gryphin G-2216 Non-Skid is a two-component, heavy-duty epoxy non-skid coating containing a synthetic resinous binder system and abrasive particles. This material was designed for use over Gryphin G-249 Epoxy Primer or Gryphin G-250 Chelating Primer. This system can be used on steel, aluminum or concrete when a heavy-duty non-skid is required. G-2216 Non-Skid features excellent resistance to oils, grease, hydraulic fluids, detergent solutions, salt water, alcohol, gasoline, and most acids. Because of its excellent resistance to wear and extreme temperature changes, G-2216 Epoxy Non-Skid will provide years of service if properly applied.
Product families
- Protective Coatings
Other characteristics
- Features
Acid Resistant, Alcohol Resistant, Automotive Fluid Resistant, Detergent Resistant, Gasoline Resistant, Grease Resistant, High Temperature Resistance, Long Term Protection, Oil Resistant, Salt Water/Spray Resistant, Skid Resistant, Wear Resistant
- Product Type
- 2K (2 component) Coating, Epoxy Coating
- 2K (2 component) Coating
- Epoxy Coating
- Application Area
- Walkway
- Application Method
- Brush, Roller, Spray, Trowel
- Compatible Substrates & Surfaces
- Aluminum, Concrete, Metal, Steel
- Usage
Warehouse floors, parking garages, walkways, railroad cars, factory work areas, loading ramps, and any surfaces needing non-skid properties.
- Color
- Custom
- Markets
- Automotive & Transportation
- Building & Construction
- Paints & Coatings
- Appearance
- Textured
- Compliance
Meets the performance requirement of MIL-D-24483A(S) and DOD-C-24667.
- Shelf LIfe
- 1 year (20°C)
- Binder Type
- Epoxy Polymide
- Consistency
- Thixotropic containing aggregate
- Pigmentation
- Titanium Dioxide, Aluminum Oxide, Silica
- Technology
- Ready-to-Use Products
- Quality Standards
- DOD-C-24667
- MIL-D-23003
- MIL-D-24483A
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mixing Ratio (Base, Parts by Weight) | 100.0 | — | — |
| Mixing Ratio (Activator, Parts by Weight) | 5.3 | — | — |
| Specific Gravity (Mixed aint) | 1.6 | kg/l | — |
| Specific Gravity | 14.5 | lb/gal | — |
| Volume Solids | 46 - 50 | — | — |
| Drying Time (Touch) | 18 | Hours | — |
| Drying Time (Hard) | 96.0 | — | — |
| Drying Time (Re-coat) | min. 36 | Hours | — |
| Flash Point | 80.0 | ° F | Closed cup |
| Application Temperature | 50 - 90 | ° F | — |
