Kardol LIQUIFIX
Kardol LiquiFix is the most effective multi-purpose lubricant on the market. It is body shop safe, non-toxic, non-staining and silicone free.
Product families
Applications
- Automotive Fluids & Lubricants
- Marine Fluids & Lubricants
Product Families
- Lubricants & Oils
Other characteristics
- Features
Anti-Squeaking, Corrosion Resistant, Excellent Stain Resistance, High Dielectric Strength, High Dust Control, High Flash Point, Non Stick, Wear Resistant; High Flash Point 275°F, twice that of aerosol spray lubricants; High Dielectric Rating 35,000 volt/Mil Per ASTMD 877 (making it safe around electrical panels, circuit boards, fuse boxes); Will not attract dust or contaminants; Eliminates sticking, binding and squeaking; Displaces moisture and prevents corrosion; Body Shop Safe; Emits No Vocs, Non-toxic; Silicone Free; Non-staining; Provides superior wear resistance; Lubricates 2-3 time longer than other Brands; Works on all materials including: Aluminum, Plastic & Rubber
- Product Type
- Lubricant
- Compatible Substrates & Surfaces
Aluminum, Elastomers & Rubbers, Metal, Painted Surfaces, Plastics
- Odor
- Odorless
- Markets
- Automotive & Transportation
- Appearance
- Light straw color
- Insoluble In
- Water
- Technology
- Ready-to-Use Products
- Base Oil
- Mineral Oil
- Labeling Claims
- Non-Toxic
- Silicon-free
- VOC Exempt
- Approvals
Scientific Certification Systems:; Exceeds CA air quality standard under CA section 01350; USDA/NSF #133617
- Ready to Use Product Features
- Anti-Squeaking
- Corrosion Resistant
- Excellent Stain Resistance
- High Dielectric Strength
- High Dust Control
- High Flash Point
- Non Stick
- Wear Resistant
- Compatible Substrates and Surfaces
- Aluminum
- Elastomers & Rubbers
- Metal
- Painted Surfaces
- Plastics
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Boiling Point | 232.0 | °C |
| Evaporation Rate (Butyl Acetate=1) | 1.1 | — |
| Operating Temperature range | -35 to 250 | °F |
| Specific Gravity (25°C) | 0.86 | — |
| Vapor Density (Air=1) | max. 1 | — |
| Vapor Pressure (20°C) | 1.0 | mm Hg |
Table 2 of 2
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Strength | 35.0 | KV/m | ASTM-877 |
| Extreme Pressure Properties, True Load Falex Pin & Vee Block Test (higher is better) | 1445.0 | lb | ASTM D-3233 |
| Flash Point | 275.0 | °F | ASTM D-93 |
| Four Ball Wear Test (lower is better) | 0.69 | mm | ASTM D-4172 |
| Oxidation Stability (72 hours Neutralization Value) | 0.07 | mgKOH/g | ASTM D-2440 |
| Rust Prevention Test [(Fresh Water) Pass, corrosion covers] | 5.0 | % | ASTM D-6650 |
| Rust Prevention Test [(Salt Water) Pass, corrosion covers] | 5.0 | % | ASTM D-6650 |
| Viscosity (Kinematics, 100°C) | 4.48 | cSt. | ASTM D-445 |
| Viscosity (Kinematics, 40°C) | 21.5 | St. | ASTM D-445 |
