Chemco Industries Stainless Steel Cleaner - ASCB#1
Stainless Steel Cleaner - ASCB#1 is a Commercial Grade Aluminum, Stainless Steel Cleaner Brightener. Restores to a like new luster. This product is specially formulated to instantly remove soil, grease, oxidation, and corrosion for aluminum surfaces. It cleans and brightens instantly; therefore, it's great for use on aluminum truck bodies, screens, trailers, airplanes, and window trim. Best of all, no rubbing is necessary. Furthermore, this product can also be used to prepare aluminum surfaces if they are to be painted.
Properties
- Physical Form
- Liquid
Product families
Applications
- Surface Care
- Industrial Cleaning
- Institutional & Catering
- Vehicle & Machinery
Product Families
- Commercial Cleaners
Other characteristics
- Features
Degreasing, Good Bright Luster, Good Brightness, Heavy Duty, Oxidation Resistant
- Product Type
Acid Cleaners, Automotive Cleaners, Cleaner, Degreasers, Institutional Cleaners; Acid Cleaners; Automotive Cleaners; Cleaner; Degreasers; Institutional Cleaners
- Compatible Substrates & Surfaces
- Metal
- Foam
- Moderate
- Odor
- Characteristic
- Caution
Contains phosphoric acid and fluorides which may be fatal if swallowed. Avoid contact with skin.
- Markets
- HI&I Care
- Benefits
Removes oxidation; Brightens; Acid-based; Quickly removes oxidation and rolad film without irritation.; Brightens Uniformly; A heavy-duty, acid based product made especially for industrial and institutional use.
- First Aid
Eyes: Immediately flush eyes with copious amounts of water for at least 15 minutes. Seek medical attention. Skin: Flush skin with water and then with water containing sodium bicarbonate. Seek medical attention. Keep away from children. Wear rubber gloves and adequate footwear when applying or rinsing. Wash hands after using. Internally: Ingest milk of magnesia or white eggs beaten with water or soap and water. Give no emetic. Call a physician immediately. Keep Out Of Reach Of Children.
- Appearance
- Thin, Clear, Liquid
- Direction
This concentrated cleaner may be diluted with thirty part water depending on the condition of the surface to be cleaned. Extemely severe conditions may allow only a five to one dilution. Brush or spray solution on surface to be cleaned working from the bottom up. Allow to remain for three to five minutes and rinse thoroughly. Use plastic pails for making up solution. Do not use on hot surfaces. Always dispose of remainder of soultion when cleaning job is finished. Do not mix with chlorinated cleansers or other cleansers. ATTENTION: IF product must be used near glass, cover glass with oil first. However, user does so at own risk. This product will etch glass. Requires no authorization by the USDA prior to its use in office and other similar non-processing areas.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Non-Flammable
- Directions by Brush
Dilute up to 9 parts with water. Use 5 gallon bucket (not galvanized).; Work from bottom up covering area 12 ft. wide approximately, brushing from side to side.; Allow mixture to contact surface for 2-5 minutes keeping the surface wet.; Rinse well with a stream of cold water. Pressure spraying desirable.
- Spray Directions
Dilute up to 9 parts with water.; Spray a 12 ft. wide area at a time.; Start at bottom moving spray gun from side to side.; Allow mixture to be in contact with surface from 2-5 minutes keeping surface wet (if very bad agitate with brush lightly).; Rinse well with a stream of cold water. A pressure spray will produce optimum results. Use pressure rinse from side to side starting at bottom.
- Ready to Use Product Features
- Degreasing
- Good Bright Luster
- Good Brightness
- Heavy Duty
- Oxidation Resistant
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| pH (100%) | 1 - 2 | — |
| Flash Point | Non-Flammable | — |
| Specific Gravity | 1.13 | — |
| Viscosity (70°F) | 1 - 5 | centipoise |
| Volume | 9.38 | Lbs/Gallon |
