To catalogue

TOXIMUL® TAABS-8

TOXIMUL® TAABS-8 is an anionic surfactant replacement used in a variety of agricultural formulations. It is a branched alcohol ether sulfate/tallow amine ethoxylated salt. It is a 100% active anionic surfactant replacements. The products provide excellent emulsification when used alone or in combination with other nonionic surfactants.

Properties

Physical Form
Liquid

Product families

Applications

Agriculture & Feed — Pest Control
  • Agricultural Pest Control

Product Families

Agrochemicals — Adjuvants & Formulation Ingredients
  • Dispersants & Emulsifiers
  • Stickers Surfactants & Wetting Agents

Other characteristics

Brand
TOXIMUL
Functions

Emulsifier (O/W), Surfactant, Surfactant (Anionic)

Markets
Agriculture & Feed
Appearance
Clear, amber liquid
Soluble In
Water, Methanol, Xylene
Insoluble In
Kerosene
Technology
Agrochemicals
Packaging Type
  • Bulk
  • Drums
Formulation Type
  • Concentrated Aqueous Emulsions
  • Emulsifiable Concentrates
  • Microemulsions
  • Oil Dispersants
  • Oil in Water Emulsions
  • Suspension Concentrates
  • Suspoemulsions
  • Water-Dispersible Granules (WDG)
Standard Packaging

TOXIMUL TAABS-8 is available in drums (450 lb, 205 kg) and in bulk quantities.

Handling

Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling TOXIMUL TAABS surfactants. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials.; Bulk Storage Information: Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 120°F (49°C) can be maintained for long periods of time without degradation of the products.; TOXIMUL TAABS products which have been stored in drums at temperatures below 40°F (4°C) may thicken or solidify. They may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 120°F (49°C) are not recommended.

Chemical Inventories
TSCA (USA)
Agrochemical Functions
  • Emulsifier (O/W)
  • Surfactant
  • Surfactant (Anionic)

Technical data

Table 1 of 1

7 rows
CharacteristicValueUnitMethod
Density (at 25°C)1.03g/ml—
Flash Pointmin. 94°CPMCC Flash Point Tester
Moisture Contentmax. 0.5%—
pH (5% in 1:1 IPA/H₂O)5.5 - 6.5——
Pour Point-18°C—
Regulated Volatile Organic Chemicals0%U.S. EPA
Viscosity (at 25°C)1120cPs—

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.