TOXIMUL® TANS-6
TOXIMUL® TANS-6 functions similarly to toximul® tans-5, being an anionic surfactant replacement renowned for excellent emulsification across a range of agricultural applications. It falls within the alkyl ether sulfates chemical group and takes on the roles of an emulsifier and adjuvant.
Properties
- Physical Form
- Liquid
Product families
Applications
- Agricultural Pest Control
Product Families
- Dispersants & Emulsifiers
- Stickers Surfactants & Wetting Agents
Other characteristics
- Brand
- TOXIMUL
- Functions
Emulsifier (O/W), Surfactant, Surfactant (Anionic)
- HLB Value
- 10.0 - 10.0
- Labeling Claims
- Biodegradable
- Markets
- Agriculture & Feed
- Appearance
- Amber liquid
- Soluble In
- Methanol, Xylene
- Insoluble In
- Water, Kerosene
- Technology
- Agrochemicals
- Health Effects
The products are expected to be slightly toxic orally (LD₅₀ >500 <2000 mg/kg) and may cause severe skin and eye irritation.
- Packaging Type
- Bulk
- Drums
- Biodegradability
The products are expected to be inherently biodegradable.
- Formulation Type
- Concentrated Aqueous Emulsions
- Emulsifiable Concentrates
- Microemulsions
- Oil Dispersants
- Oil in Water Emulsions
- Suspension Concentrates
- Suspoemulsions
- Water-Dispersible Granules (WDG)
- Standard Packaging
TOXIMUL TANS-6 is available in drums (450 lb, 205 kg) and in bulk quantities.
- Handling
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling TOXIMUL TANS surfactants. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials.; Bulk Storage Information: Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 120°F (49°C) can be maintained for long periods of time without degradation of the products.; TOXIMUL TANS products which have been stored in drums at temperatures below 25°F (-4°C) may thicken or solidify. They may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 120°F (49°C) are not recommended.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.
- Chemical Inventories
- DSL (Canada)
- IECSC (China)
- NZIoC (New Zealand)
- TSCA (USA)
- Agrochemical Functions
- Emulsifier (O/W)
- Surfactant
- Surfactant (Anionic)
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Actives Content | 100 | % | — |
| Density (at 25°C) | 1.06 | g/ml | — |
| Flash Point | min. 94 | °C | PMCC Flash Point Tester |
| HLB | 10 | — | — |
| Moisture Content | 0.1 | % | — |
| pH (5% in 1:1 IPA/H₂O) | 5.8 | — | — |
| Pour Point | -11 | °C | — |
| Regulated Volatile Organic Chemicals (Aromatic Naphtha) | 0 | % | U.S. EPA |
| Viscosity (at 25°C) | 4580 | cPs | — |
