To catalogue
Armlen PP MD 50-2TS
- Chemical Family
- PolyolefinsPolypropylenes (PP)
Armlen PP MD 50-2TS is a 50% mineral filled thermostabilized material, compliant with Europesecurity requirements. Designed for molding of bodywork for electrical and general goods. Available in white and gray colors.
Product families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Brand
- R&P POLYPLASTIC Armlen
- Polymer Name
- Polypropylene (unspecified)
- Melt Flow Index
- 12.0 - 16.0 g/10 min
- Fillers Included
- Mineral
- Color
- Grey
- White
- Markets
- Consumer Goods
- Electrical & Electronics
- Applications
Consumer Goods — Other Consumer Goods Applications; Electrical & Electronics — Other Electrical & Electronics Applications
- Technology
- Plastics
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Point | 162 | °C | ISO 11357 |
| Deflection Temperature at 0.45 MPa load | 100 | °C | ISO 75 |
| Coefficient of Linear Thermal Expansion | 50 | (10-6)К-1 | ISO 11359-2 |
Table 2 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Temperature Resistance, hot wire ignition | 750 | °C | IEC 60695-2-10 |
Table 3 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (250°C, 2.16 kg) | 12-16 | g/10 min | ISO 1133 |
| Melt Temperature | 235 | °C | — |
| Mold Temperature | 60 | °C | — |
| Moulding Shrinkage, parallel | 0.9-1.1 | % | ISO 294-4 |
| Moulding Shrinkage, normal | 0.9-1.1 | % | ISO 294-4 |
Table 4 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1450 | kg/m3 | ISO 1183 |
| Yield Stress | 16 | 50mm/min | ISO 527 |
| Tensile Modulus | 2400 | MPa | ISO 178 |
| Flexural Stress at maximum load | 25 | MPa | ISO 178 |
