To catalogue
fluteck™ K300
- Chemical Family
- Polyether Ether Ketone (PEEK)
fluteck™ K300 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).
Product families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- fluteck
- Polymer Name
- Polyetheretherketone (PEEK)
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Food & Nutrition
- Healthcare & Pharma
- Industrial
- Printing & Packaging
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Creep Resistant
- Dimensional Stability
- Excellent Mechanical Strength
- Fatigue Resistant
- Flame Retardant
- Heat Sterilizable
- High Stiffness
- Product Properties
FDA food contact compliant; Excellent wear & friction behavior; Low permeability; Low abrasion at the counterpart surface of soft metals; Good dimensional stability at high temperature;; Good electrical strength; High mechanical strength, stiffness and creep resistance; Fatigue resistant; Flame retardant; Excellent chemical resistance; High energy radiation resistant; Radiation and heat sterilizable
Technical data
Table 1 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.30 - 1.32 | g/cm³ | ASTM D 792 |
| Water Absorption (24 Hours) | 0.1 | % | ASTM D 570 |
| Mold Shrinkage (Along the Flow) | 1 - 1.3 | % | ASTM D 955 |
Table 2 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation at Break (23°C) | min. 10 | % | ASTM D 638 |
| Tensile Strength at Yield (23°C) | min. 95 | MPa | ASTM D 638 |
| Tensile Modulus | 3.3 - 4 | GPa | ASTM D 638 |
| Izod Impact Strength (Notched) | min. 85 | J/m | ASTM D 256 |
| Hardness | min. 80 | Shore D | ASTM D 2240 |
| Rockwell Hardness | min. 90 | — | ASTM D 785 |
| Poisson's Ratio | 0.33 | — | ASTM E132 |
Table 3 of 4
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Peak Melting Temperature | 340 - 343 | °C | ASTM D3418 |
| Specific Heat Capacity (23°C) | 2.2 | kJ kg⁻¹ °C⁻¹ | DSC |
| Thermal Conductivity (23°C) | 0.25 | W/mK | ASTM E1530 |
| Deflection Temperature (1.8 Mpa, Unannealed) | 157 | °C | ASTM D648 |
| Relative Thermal Index (Electrical) | 260 | °C | UL746B |
| Relative Thermal Index (Mechanical) | 180 | °C | UL746B |
| Relative Thermal Index (Mechanical) | 240 | °C | UL746B |
| Flammability | V - 0 | — | UL94 |
Table 4 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectic Strength (2 mm Thick) | 22 | kV/mm | ASTM D149 |
| Surface Resistivity | 10 | Ohm | ASTM D257 |
| Volume Resistivity | 10¹¹ | Ohm-cm | ASTM D257 |
