CIM® 1000 Trowel Grade
- Chemical Family
- Urethanes
CIM® 1000 Trowel Grade Trowel Grade is a tough, liquid applied, two component, chemical and corrosion resistant urethane elastomeric coating, chemically thickened to allow trowel applications with minimum sag. CIM 1000 Trowel Grade is designed for use with all CIM materials. CIM 1000 Trowel Grade can be used as a crack filler or for application to vertical surfaces and corner flashings. CIM 1000 Trowel Grade offers the same advantages as CIM 1000 and is approved for contact with potable water in accordance with ANSI/NSF 61. CIM 1000 Trowel Grade may be applied at thicknesses up to 250 mils on vertical surfaces in one coat.
Other characteristics
- Brand
- CIM
- Features
Excellent Coating Performance, Fast Curing, Good Toughness, Good Weather Stability
- Product Type
- 2K (2 component) Coating
- Application Method
- Trowel
- Compatible Substrates & Surfaces
Concrete, Glass, Metal, Painted Surfaces, Steel, Wood
- Mixing
DO NOT THIN. DO NOT HAND MIX. Begin mixing each pail (4.0 gal.) of CIM 1000 Trowel Grade Premix using a power mixer (e.g. 1/ 2" drill and an eight inch mud mixer.) Do not draw air into the mix. While mixing, slowly add one jug (0.5 gal.) of CIM 1000 Activator to the pail and mix thoroughly for 3 full minutes. The proportions are pre-measured. DO NOT ESTIMATE. Do not use CIM Mixing Jigs when mixing CIM 1000 Trowel Grade.
- Markets
- Building & Construction
- Pot Life
Less than 20 minutes. Working time depends on temperature and method of application.
- PACKAGING
CIM 1000 Trowel Grade is available in mixed kits of 0.8 gallon and 4.5 gallons. Each unit consists of a container of premix and a smaller container of activator. Quantities have been premeasured to provide the proper mixing ratio, leaving sufficient room in the premix container to facilitate adequate mixing. Do not estimate proportions. CIM 1000 Trowel Grad is a lso available in 52.5 gal drums and dual cartrid ges.
Technical data
Table 1 of 1
34 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids by Volume | 89.0 | % | — |
| VOC | 88 (0.74 ) | g/l (lb./gal.) | — |
| Abrasion Resistance (Loss) | 1.2 | mg | ASTM D4060 CS-17 Wheel, 1000 rev |
| Adhesion to Concrete (Dry) | 350.0 | psi | Elcometer |
| Deflection Temperature (Minimum Use Temperature) | max. -60 | ºF | ASTM D648 |
| Density Premix | 7.9 | Ibs./gal. | — |
| Density Activator | 10.1 | Ibs./gal. | — |
| Density Mixed & Cured | 8.3 | Ibs./gal. | — |
| Elastomeric Waterproofing | Exceeds all criteria | — | ASTM C836 |
| Elastomeric Waterproofing | Exceeds all criteria | — | ASTM C957 |
| Extension to Break | 300.0 | % | ASTM D412 |
| Flooring and Shower Lining | Pass | — | UPC/IBC ANSI 118.10 |
