CIM® 61TN Epoxy Primer
- Chemical Family
- Epoxy & Epoxy Derivatives
CIM® 61TN Epoxy Primer is a two component high solids epoxy coating used as a primer for porous and non-porous surfaces such as concrete and metal. A rapid cure version, CIM 61 TN-RC, is also available and should be used when air and surface temperatures are below 50ºF and above 35ºF during application and cure. CIM 61TN epoxy primer is a two-component, high solids, epoxy coating. It is used as a primer for porous and non-porous surfaces such as concrete and metal.ANSI/NSF 61 approved for potable water contact up to 82ºC.
Other characteristics
- Brand
- CIM
- Features
- Fast Curing
- Product Type
2K (2 component) Coating, Epoxy Coating, Primer, Solventless & High Solids Coating
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel, Wood
- Markets
- Printing & Packaging
- Storage
Store at 40°F to 110°F (5°C to 43°C) temperature. NFPA Class IC.
- PACKAGING
CIM 61TN and 61TN-RC Epoxy Primer are packaged in 2 gallon kits consisting of 1 gallon of Resin and 1 gallon of Hardener.
- Shelf LIfe
1.5 years (Epoxy Hardener), 1.5 years (Epoxy Resin)
- Precaution
Mixing equipment and surfaces where material is applied must be ABSOLUTELY DRY. Do not apply in wet weather, when rain is imminent or when the surface may become wet before the coating is cured. Strictly observe mixing, induction times and substrate temperature requirements
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids by Volume (Mixed (1123 dry mil x sq. ft./gal.)) | 70.0 | % | ASTM D 2697-7 days |
| Density CIM 61TN and 61TN-RC Resin | 13.69 | Ibs./gal. | — |
| Density CIM 61TN Hardener | 12.52 | Ibs./gal. | — |
| Density CIM 61TN-RC Hardener | 12.46 | Ibs./gal. | — |
| VOC (EPA 24) | 240 (2.0) | g/l (lb./gal.) | — |
| Flash Point Epoxy Resin | 24.0 | ºF | — |
| DOT Class Epoxy Resin | Class 3 | — | UN1139, PG III |
| DOT Class Epoxy Hardener | Class 3 | — | UN1139, PG III |
