CIM® 1000
- Chemical Family
- Urethanes
CIM® 1000 is a liquid applied urethane coating that cures in hours to form a tough elastomeric coating that adheres to most substrates, forming a chemical and abrasion resistant barrier for waterproofing, corrosion protection, and containment of water and most aqueous chemicals.
Other characteristics
- Brand
- CIM
- Features
Excellent Coating Performance, Fast Curing, Good Toughness, Good Weather Stability, Water Resistant
- Product Type
- 2K (2 component) Coating
- Application Method
- Roller, Trowel
- Compatible Substrates & Surfaces
Concrete, Glass, Metal, Painted Surfaces, Steel, Wood
- Mixing
DO NOT THIN. DO NOT HAND MIX. Begin mixing each pail (4.5 gal.) of CIM 1000 Premix using a power mixer (e.g. 2" drill and an eight inch mud mixer). Do not draw air into the mix. While mixing, slowly add one jug (0.5 gal.) of CIM 1000 Activator to the pail. Once the CIM 1000 Activator has been added, mix thoroughly for 3 full minutes. The proportions are premeasured. DO NOT ESTIMATE. Mixing Jigs and Timers from C.I.M. Industries help eliminate mixing errors and increase productivity on the job.
- Markets
- Building & Construction
- Storage
Store at 20°F to 110°F temperature for NFPA Class II.; Store at 70°F to 95°F temperature for NFPA Class III B.
- Pot Life
About 30 minutes. Working time depends on temperature and method of application. Working time for spray application will be significantly shorter.
- PACKAGING
CIM 1000 is available in mixed units of 5 gallons. Each unit consists of a container of premix and a smaller container of activator. Quantities have been premeasured to provide the proper mixing ratio, leaving sufficient room in the premix container to facilitate adequate mixing. Do not estimate proportions.
Technical data
Table 1 of 1
34 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids by Volume (1413 dry mils x sq. ft./gal.) | 88.0 | % | — |
| VOC | 92 (0.76) | g/l (lb./gal.) | — |
| Abrasion Resistance (Loss) | 1.2 | mg | ASTM D4060 Taber Abraser CS-17 Wheel, 1000 gr./1000 rev. |
| Adhesion to Concrete (Dry) | 350.0 | psi | Elcometer |
| Deflection Temperature (Minimum Use Temperature) | max. -60 | ºF | ASTM D648 |
| Density Premix | 8.0 | Ibs./gal. | — |
| Density Activator | 10.1 | Ibs./gal. | — |
| Density Mixed & Cured | 8.3 | Ibs./gal. | — |
| Elastomeric Waterproofing | Exceeds all criteria | — | ASTM C836 |
| Elastomeric Waterproofing | Exceeds all criteria | — | ASTM C957 |
| Extension to Break | 400.0 | % | ASTM D412 |
| Flammability | Pass/combustible substrate | — | ASTM D2859 |
