Performance Polymers IPS 100
- Chemical Family
- Siloxanes
Performance Polymers IPS 100 is a single component, ambient curing, inorganic polysiloxane finish. High performance novel technology which is solvent free (100% solids) coating. Fully inorganic chemistry provides outstanding resistance to UV degradation & tough environmental conditions. IPS 100 coating has environmentally friendly properties including ultra-low VOC level and an amine, isocyanate, tin & heavy metal free formulation. Curing from ambient conditions to a hard & durable finish. IPS 100 has unique novel inorganic chemistry resulting in ultra-high UV resistance, hydrophobic, low dirt pick up, anti-graffiti properties & easy maintenance with single pack technology. IPS 100 is formulated to provide color finishes which are superior performing in gloss & color retention resulting in high levels of resistance to severe weather conditions without degradation.
Product families
- Other Paints & Coatings
Other characteristics
- Features
Durable, Excellent Dirt Pick-up Resistance, Good Weather Fastness, High Performance, UV Resistant
- Product Type
1K (1 component) Coating, Solventless & High Solids Coating; 1K (1 component) Coating; Solventless & High Solids Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal, Stainless Steel, Steel
- Markets
- Building & Construction
- Paints & Coatings
- Printing & Packaging
- Cure
- Air Dry
- Technology
- Ready-to-Use Products
- Labeling Claims
- Environmentally Friendly
- Solvent-free
- Product chemistry
- A single component, ambient curing, polysiloxane
- Application Methods
- Brush
- Roller
- Spray
- Safety Precautions
This product is for use only by professional applicators in accordance with information in this Technical Data Sheet (TDS) and the applicable Material Safety Data Sheet (MSDS). Refer to the product MSDS before using this material. All usage of this product must be kept in compliance with l°Cal, health, safety & environmental conditions & regulations.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific gravity | 1.34 | g/mL |
| Temperature resistance | 180 | °C |
| Theoretical spreading rate at 75µm DFT | 13.33 | m2/l |
| Thermal conductivity (λ) | 0.05 | W m-1 K-1 |
| Typical film thickness (DFT per coat) | 75 - 150 | µm |
| Volume solids | 100 | % |
