Thermaguard™ TIC 400
- Chemical Family
- Siloxanes
Thermaguard™ TIC 400 is a new technology waterbased, single component, inorganic polymeric siloxane matrix, Thermal Insulation Coating (TIC). The insulation coating is formulated to provide a seamless, hydrophobic, weather resistant insulation film. The insulation coating is an inorganic & ultra-low VOC coating. Offering hydrophobicity (moisture resistance), operating temperatures from -60 to 400oC range & exceptional weathering resistance. Thermaguard™ TIC 400 acts as a thermal barrier, which can improve energy efficiency, prevent Corrosion Under Insulation (CUI) occurring, reduce condensation build up & provide personal protection according to ISO 13732-1 (SafeTouch™ properties). Protecting interior temperatures against cold, warm & humid weather conditions. Elimination of external cladding results in a maintenance friendly insulation system for quick inspections. Thermaguard™ TIC 400 has Ultra-High-Build (UHB) capabilities up to 20000 microns DFT in a single multi-pass application. Application at such thicknesses allows use of Thermaguard™ TIC 400 liquid insulation to partly or completely replace use of traditional insulation material systems.
Product families
- Other Paints & Coatings
Other characteristics
- Brand
- Thermaguard
- Features
Corrosion Resistant, Good Weather Fastness, Moisture Resistant
- Product Type
- 1K (1 component) Coating, Waterborne Coating
- 1K (1 component) Coating
- Waterborne Coating
- Application Method
- Brush, Roller, Spray, Trowel
- Compatible Substrates & Surfaces
- Metal, Stainless Steel, Steel
- Mixing
Thermaguard™ TIC 400 is a single component waterbased product. Open only the number of pails which will be immediately used. Immediately re-seal any unneeded pails of Thermaguard™ TIC 400. Mix Thermaguard™ TIC 400 with a mechanical agitator, using slow or reverse speed and a plastic or nonreactive metal squirrel cage mixer as shown in the Application Guideline.
- Markets
- Industrial
- Paints & Coatings
- Technology
- Ready-to-Use Products
- Application Methods
Brush; Roller; Spray; Trowel; A waterbased, single component, ambient curing, ultra-high-build inorganic polymeric siloxane matrix.
- Safety Precautions
This product is for use only by professional applicators in accordance with information in this Technical Data Sheet (TDS) and the applicable Material Safety Data Sheet (MSDS). Refer to the product MSDS before using this material. All usage of this product must be kept in compliance with l°Cal, health, safety & environmental conditions & regulations.
- Shelf Life Storage
Thermaguard™ TIC 400 should be stored in a dry, shaded environment away from heat & ignition sources. Do not allow material to freeze. Shelf life is minimum 12 months at 23°C.
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific gravity | 0.74 | g/cm3 |
| Temperature resistance | -60 to 400 | °C |
| Theoretical spreading rate at 10000µm DFT | 0.08 | m2/l |
| Theoretical spreading rate at 1000µm DFT | 0.76 | m2/l |
| Thermal conductivity (λ) | max. 0.06 | W m-1 K-1 |
| Typical film thickness (DFT per coat) | 10000 | µm |
| VOC Content | max. 1 | g/L |
| Volume solids | 76 ± 2 | % |
