EBECRYL® LED 02
EBECRYL® LED 02 is a clear liquid radiation-curable coating designed for the paints and coatings market. This formulation is bisphenol A-free, boasting a low carbon footprint (PCF) while being solvent-free and voc-free. Tailored for industrial coatings, it utilizes radiation cure technology, serving both as a radiation cure coating and ink for specific applications.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Industrial Coatings
Product Families
- Functional Additives
- Acrylics
Other characteristics
- Brand
- EBECRYL
- Functions
- Binder & Resin
- Labeling Claims
Bisphenol A-free, Low Carbon Footprint (PCF), Solvent-free, VOC-free; Bisphenol A-free; Low Carbon Footprint (PCF); Solvent-free; VOC-free
- Markets
- Paints & Coatings
- Appearance
- Clear liquid
- Cure
- Radiation Cure
- Coating Type
- Radiation Curable Coating
- Technology
- CASE Ingredients
- Compatibility
EBECRYL LED 02 is compatible with a broad range of selected resins of different chemical families, such as urethane acrylates, polyester acrylates, and epoxy acrylates. EBECRYL LED 02 is also compatible with acidic additives such as adhesion promoters.. However, EBECRYL LED 02 is not compatible with all resins, and this should be checked prior to use. Resins containing amines have a limited compatibility with EBECRYL LED 02. Phosphine oxides such as TPO, and mono and bis acyl phosphine oxides, such as MAPO and BAPO are recommended photoinitiator types for UV LED and UVA curing.
- Ink and Toner Type
- Radiation Curable Ink
- Country Availability
- Brazil
- Canada
- Mexico
- USA
- Storage and Handling
Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
- Suggested Applications
EBECRYL LED 02 has been developed for UV LED applications, but is equally suitable for UVA and other low energy curing applications. It can also provide better surface cure in typical, high energy curing applications that use standard medium pressure mercury lamps.
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Color | max. 50 | Pt-Co scale |
| Density (25°C) | 1.14 | g/ml |
| Viscosity (25°C) | 90-150 | cP/mPa·s |
