SETALUX® 57-2500
SETALUX® 57-2500, a member of the acrylic polyols and acrylics and acrylates chemical family, stands out as a versatile solution for automotive and transportation applications, specifically automotive exterior and body coatings. SETALUX® 57-2500 is designed for compatibility with metal substrates. This product boasts features like faster cycle time, low energy consumption, improved hardness, high gloss, enhanced chemical resistance, outdoor durability, and improved water spotting resistance. With a clean, clear appearance free from extraneous matter, SETALUX® 57-2500 is your go-to choice for top-notch automotive exterior and body coatings, offering efficiency and high-performance results.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Exterior & Body
- Vehicle Refinish
- Vehicle Refinish
- Industrial Coatings
- Metal Coatings
Product Families
- Acrylics
Other characteristics
- Brand
- SETALUX
- End Uses
1K (1 component) Coating, 2K (2 component) Coating, Base Coat, Clearcoat, Solventborne Coating, Solventless & High Solids Coating
- Features
Faster Cycle Time, High Gloss, Improved Chemical Resistance, Improved Hardness, Improved Water Spotting, Low Energy Consumption, Outdoor Durability
- Compatible Substrates & Surfaces
- Metal
- Markets
- Automotive & Transportation
- Paints & Coatings
- Appearance
- Clean Clear and Free From Extraneous Matter
- Shelf LIfe
- 3 years
- Coating Type
- 1K (1 component) Coating
- 2K (2 component) Coating
- Base Coat
- Clearcoat
- Solventborne Coating
- Solventless & High Solids Coating
- Technology
- CASE Ingredients
- Suggested Uses
2.1, 3.5, and 4.0 lb/gal VOC Clearcoats for vehicle refinish; Monocoats for vehicle refinish and transportation; Modifier resin for two component basecoats and monocoats
- Labeling Claims
- APEO-Free
- Benzyl Alcohol-free
- Bisphenol A-free
- Formaldehyde-free
- Monomer-free
- Country Availability
- Brazil
- Canada
- Mexico
- USA
- Storage and Handling
In the original sealed containers, this product is stable for 3 years at temperatures up to 100°F.; Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.; Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.; Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
- Performance Highlights
Fast cure; Good long pot-life; Excellent early hardness development; dust-free in <10 min; Very good crosslinking development (MEK rubs); Excellent exterior durability; Excellent clarity; Excellent gloss; Excellent distinctness of image (DOI); Low VOC coatings possible; <3.0 lbs/gal
- Curing
Based on 100% conversion of reactive groups the following equation can be used to calculate the quantity of polyisocyanate needed for crosslinking 100 parts (insert product name) (on solids):; Polyisocyanate(f.o.d.) = 42 x 100 x OH% (solid resin) / 17 x NCO% (f.o.d.); 42 = molecular weight of the NCO-group; 17 = molecular weight of the OH-group; Anhydrous solvents as well as solvents free of hydroxyl functional groups should be used in the presence of polyisocyanates, as dilution solvents.
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Color | max. 30 | APHA |
| Reduced Viscosity (50% n.v. in acetone) | B - F | Gardner -Holdt |
| Density | 9.30 ± 0.10 | lbs/gal |
| Acid Value (on n.v.) | 14 - 18 | mg KOH/g |
| HEW (on n.v.) | 400 | — |
| Non-Volatile Content (volume) | 59.1 | %Vol |
| Non-Volatile Content (weight) | 60.0 ± 1.0 | %wt |
| Flash Point (Setaflash) | -2 | °F |
| Viscosity (77°F) | Z - Z2 | Gardner -Holdt |
