To catalogue
Braskem America HDP0353
- Chemical Family
- PolyethylenesPolyolefins
Braskem HDP0353 is a high density polyethylene copolymer (HDPE) developed for corrugated piping. Applications and suggested users include Industrial Standard Compliance ASTM D 3350 and Cell Classification PE 435620A.\nFor more information regarding REACH, please visit Braskem's REACH site
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Building & Construction — Building Materials
- Pipes & Plumbing
Electrical & Electronics — Parts & Components
- Conduits & Cable Management
Electrical & Electronics — Wire & Cable
- Optical Fiber & Telecom
Product Families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Polymer Name
- High Density Polyethylene (HDPE)
- Melt Flow Index
- 0.35 g/10 min
- Processing Methods
- Pipe Extrusion
- Markets
- Building & Construction
- Electrical & Electronics
- Technology
- Plastics
- Quality Standards
- AASHTO M294
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
Comprehensive Environmental Response Compensations & Liability Act (CERCLA); FDA 40 CFR 122.21; FDA 40 CFR 122.42
- Plastics and Elastomers End Uses
- Conduit
- Corrugated Pipe
- Pipes
- Piping
- Telecommunications
- Wall Panels
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Pipe Extrusion
Technical data
Table 1 of 2
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Brittleness Temperature | max. -75 | °C | ASTM D-746 |
| Elasticity Modulus (Secant 1%) | 1275 | MPa | ASTM D-638 |
| Elongation at Break | 665 | % | ASTM D-638 |
| Elongation at Yield | 6 | % | ASTM D-638 |
| Environmental Stress Cracking Resistance (10% Igepal, Condition B) | min. 1500 | h | ASTM D-1693 |
| Environmental Stress Cracking Resistance(100% Igepal, Condition B) | min. 1500 | h | ASTM D-1693 |
| Flexural Modulus (Secant 1%) | 1255 | MPa | ASTM D-790 |
| Hardness | 65 | Shore D | ASTM D-2240 |
| Heat Deflection Temperature (0.455 Mpa) | 70 | °C | ASTM D-648 |
| Izod Impact Strength (at 23°C) | 170 | J/m | ASTM D-790 |
| NCLS | 1000 | h | ASTM F 2136 |
| Tensile Strength at Break | 40 | MPa | ASTM D-638 |
Table 2 of 2
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D-792 |
| Melt Flow Rate (190°C/2.16Kg) | 0.35 | g/10 min | ASTM D-1238 |
