SPB608
- Chemical Family
- PolyethylenesPolyolefins
SPB608 is a low-density polyethylene (LDPE) specially designed for injection molding applications. With excellent processability and low viscosity during processing, it is ideal for products that require flexibility. Injection molded products made with this resin exhibit good flexibility. This grade is additives-free and boasts a minimum carbon biobased content of 95%, as determined by ASTM D6866.\nFor more information regarding REACH, please visit Braskem's REACH site
Properties
- Physical Form
- Granules
- Pellets
- Solid
Product families
Applications
- Food & Beverage Packaging
- Non-Food Consumer Packaging
Product Families
- Polyolefins
Other characteristics
- Brand
- I'm green bio-based
- Polymer Name
- Low Density Polyethylene (LDPE)
- Melt Flow Index
- 30.0 g/10 min
- Processing Methods
- Extrusion, Injection Molding
- Note
Typical Properties - Plaque Properties:. Test specimens from compression molded plaque according to ASTM D4703. Plaque Thickness: a) 2mm. b) 3mm c) 6mm. NB = No break
- Markets
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Bio-based
- Carbon Black-free
- Dye Free
- Pigment-free
- Recyclable
- Sustainable
- Quality Standards
- In Preview
- Material Features
- Good Flexibility
- Good Processability
- Low Viscosity
- Renewable Resource Content
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- EINECS (EU)
- ENCS (Japan)
- IECSC (China)
- ISHL (Japan)
- KECI (Korea)
- NZIoC (New Zealand)
- Certifications and Compliance
ANVISA Resolution RDC No. 105/1999; ANVISA Resolution RDC No. 326/2019; ANVISA Resolution RDC No. 56/2012; ANVISA Resolution RDC No. 91/2001; Comprehensive Environmental Response Compensations & Liability Act (CERCLA); Directive 1333/2008/EC; EC No. 2023/2006; EC No.1907/2006; MERCOSUR Resolution GMC No. 02/12; MERCOSUR Resolution GMC No. 03/92; MERCOSUR Resolution GMC No. 39/19; MERCOSUR Resolution GMC No. 56/92; Regulation (EC) No. 1334/2008; Regulation (EU) No. 10/2011 (PIM); Regulation (EU) No. 1935/2004; Regulation (EU) No. 2023/1627
- Plastics and Elastomers End Uses
- Bucket
- Caps
- Masterbatches
- Pails
- Snap Closure
- Tile Backing
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Molding
Technical data
Table 1 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| C14 Content | min. 95 | % | ASTM D 6866 |
Table 2 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (at 190°C, 2.16kg) | 30.0 | g/10 min | ASTM D1238 |
| Density | 0.915 | g/cm³ | ASTM D1505 |
Table 3 of 3
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (at Yield) ᵃ | 8.0 | MPa | ASTM D638 |
| Tensile Strength (at Break) ᵃ | 9.0 | MPa | ASTM D638 |
| Elongation (at Break) ᵃ | 390.0 | % | ASTM D638 |
| Flexural Modulus (1% Secant) ᵇ | 150.0 | MPa | ASTM D 790 |
| Hardness ᶜ | 42.0 | — | ASTM D 2240 |
| Vicat Softening Temperature (at 10 N) ᵇ | 79.0 | °C | ASTM D1525 |
