GWAX 150E
- CAS Number
- 9002-88-4
- INCI Name
- Polyethylene
- Chemical Name
- Polyethylene
GWAX 150E is a bio-based surface modifier derived from polyethylenes, specifically designed for various applications in the personal care, industrial, and cosmetic industries. Its high-quality granules make it easy to handle and use. As a surface modifier, GWAX 150E enhances the performance of hot-melt adhesives and resin manufacturing processes. It is also suitable for use in masterbatch formulations and pigment applications. With its bio-based nature, GWAX 150E offers a sustainable solution for your additive needs, ensuring reliable and effective results.\nFor more information regarding REACH, please visit Braskem's REACH site
Properties
- Physical Form
- Granules
- Solid
- Wax
Identification
- Chemical Family
- Polyethylene Waxes, Polyethylenes, Polyolefins, WaxesPolyethylene WaxesPolyethylenesPolyolefinsWaxes
- CASE Ingredients Functions
- Surface Modifier
Product families
Applications
- Skin Care
- Resin Manufacturing
Product Families
- Surface Modifiers
- Polyolefins
- Fats Butters & Waxes
- Hydrocarbons & Waxes
Other characteristics
- Brand
- I'm green bio-based
- Synonyms
Ethene polymer, Ethylene polymer, Evanite Submicro
- Polymer Name
- Polyethylene (unspecified)
- Markets
- Industrial
- Personal Care
- Shelf LIfe
- 3 years
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Cosmetic Ingredients
- Plastics
- Packaging Type
- Bags
- Super Sacks
- Labeling Claims
- Bio-based
- Sustainable
- Quality Standards
- In Preview
- Packaging Information
The wax is produced in 3 mm granules and shipped in BigBags (2 x 600 kg) strapped on a CP9 pallet.; Alternative packaging: 25 kg bags on a EUR pallet.
- Base Chemicals End Uses
- Masterbach Base Resin
- Pigment
- Certifications and Compliance
Comprehensive Environmental Response Compensations & Liability Act (CERCLA); EC No.1907/2006; SARA 311/312; SARA 313
- Plastics and Elastomers End Uses
- Masterbatches
- Plastics and Elastomers Functions
- Resin
- Adhesives And Sealants
- Hot Melt Adhesive
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dropping Point | 108.0 | °C | DIN ISO 2176 |
| Solidification Point | 92.0 | °C | DIN ISO 2207 |
| Melting Point | 99.0 | °C | DIN 51007 |
| Needle Penetration (at 25°C) | max. 7 | 10‐1mm | DIN 51579, ASTM D1321 |
| Dynamic Viscosity (at 140°C) | 420.0 | mPas | DIN EN ISO 2555 |
| Density (at 23°C) | 0.88 | g/cm³ | DIN EN ISO 1183‐1 |
| Acid Value | max. 2 | mg KOH/g | DIN EN ISO 2114 |
| Saponification Value | max. 2 | mg KOH/g | DIN EN ISO 3681 |
| Yellowness Index | max. 10 | — | DIN EN ISO 11664 |
| Flash Point (Clevel) | min. 250 | °C | DIN EN ISO 2592 |
| Flash Point (Pensky M.) | min. 220 | °C | DIN EN ISO 2719 |
