SBC818R50
- Chemical Family
- PolyethylenesPolyolefins
SBC818R50 is a low-density polyethylene specifically designed for coating processes. This grade showcases exceptional optical properties, low neck-in, film stability, and strong adhesion on porous substrates. It is free from additives. Notably, it possesses a minimum carbon biobased content of 50%, as determined by ASTM D6866.\nFor more information regarding REACH, please visit Braskem's REACH site
Properties
- Physical Form
- Granules
- Pellets
- Solid
Product families
- Polyolefins
Other characteristics
- Brand
- I'm green bio-based
- Polymer Name
- Low Density Polyethylene (LDPE)
- Melt Flow Index
- 8.3 g/10 min
- Processing Methods
- Extrusion, Extrusion Coating
- Note
- 1 LDPE
- 25 μm thick film, obtained from a 75 mm extruder, with blow up ratio of 2:1, die gap 1 mm and Die rate 1,75 kg/h.cm (MD = Machine Direction and TD = Transversal Direction).
- 2 ND
- Not Determined.
- 3 25 μm thick film, temperature
- 38° C, 100% RH.
- Technology
- Plastics
- Labeling Claims
- Additive-free
- Azo Colorants-free
- Azo Dyes-free
- Bio-based
- Carbon Black-free
- Dye Free
- Low Carbon Footprint (PCF)
- Pigment-free
- Quality Standards
- In Preview
- Material Features
- Excellent Substrate Adhesion
- Good Film Stability
- Good Optical Properties
- Low Carbon Content
- Low Neck-In
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- EINECS (EU)
- ENCS (Japan)
- IECSC (China)
- ISHL (Japan)
- KECI (Korea)
- NZIoC (New Zealand)
- Certifications and Compliance
ANVISA Resolution RDC No. 105/1999; ANVISA Resolution RDC No. 326/2019; ANVISA Resolution RDC No. 56/2012; ANVISA Resolution RDC No. 91/2001; Comprehensive Environmental Response Compensations & Liability Act (CERCLA); Directive 1333/2008/EC; EC No. 2023/2006; EC No.1907/2006; MERCOSUR Resolution GMC No. 02/12; MERCOSUR Resolution GMC No. 03/92; MERCOSUR Resolution GMC No. 39/19; MERCOSUR Resolution GMC No. 56/92; Regulation (EC) No. 1334/2008; Regulation (EU) No. 10/2011 (PIM); Regulation (EU) No. 1935/2004; Regulation (EU) No. 2023/1627
- Plastics and Elastomers End Uses
- Film
- Masterbatches
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Extrusion Coating
Technical data
Table 1 of 2
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (at Break, MD) ¹ | 25.0 | MPa | ASTM D882 |
| Tensile Strength (at Break, TD) ¹ | 20.0 | MPa | ASTM D882 |
| Elongation (at Break, MD) ¹ | 380.0 | % | ASTM D882 |
| Elongation (at Break, TD) ¹ | 870.0 | % | ASTM D882 |
| Dart Drop Impact Strength ¹ | 64.0 | g/F50 | ASTM D1709 |
| Elmendorf Tear Strength (TD) ¹ | 56.0 | gF | ASTM D1922 |
| Haze ¹ | 8.0 | % | ASTM D1003 |
| Gloss (Angle 60°) ¹ | 76.0 | % | ASTM D2457 |
| Flexural Modulus (1% Secant, MD) | 70 | MPa | D 882 |
| Flexural Modulus (1% Secant, TD) | 70 | MPa | D 882 |
Table 2 of 2
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (at 190°C, 2.16kg) | 8.3 | g/10 min | ASTM D1238 |
| Density | 0.918 | g/cm³ | ASTM D1505 |
