SGF4950
- Chemical Family
- PolyethylenesPolyolefins
SGF4950 is a high-density polyethylene copolymer, designed for the blow-molding segment. It exhibits a well-balanced combination of impact strength, stiffness, and environmental stress cracking resistance, while ensuring excellent processability. This grade contains a minimum biobased carbon content of 96%, determined according to ASTM D6866.\nFor more information regarding REACH, please visit Braskem's REACH site
Properties
- Physical Form
- Granules
- Pellets
- Solid
Product families
Applications
- Food & Beverage Packaging
- Non-Food Consumer Packaging
Product Families
- Polyolefins
Other characteristics
- Brand
- I'm green bio-based
- Polymer Name
- High Density Polyethylene (HDPE)
- Melt Flow Index
- 28.0 g/10 min
- Processing Methods
Blow Molding, Compression Molding, Extrusion, Extrusion Blow Molding (EBM), Profile Extrusion, Tubing Extrusion
- Note
Typical properties correspond to average values obtained in our laboratories. Test specimens prepared from compression molded sheet made according to ASTM D 4703. Thickness of test piece: a) 2 mm; b) 3 mm.
- Markets
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Bio-based
- Carbon Black-free
- Dye Free
- Low Carbon Footprint (PCF)
- Pigment-free
- Recyclable
- Quality Standards
- In Preview
- Material Features
Good Environmental Stress Crack Resistance (ESCR); Good Impact Strength; Good Processability; Good Stiffness; Low Carbon Content; Renewable Resource Content
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- EINECS (EU)
- ENCS (Japan)
- IECSC (China)
- ISHL (Japan)
- KECI (Korea)
- NCI (Vietnam)
- Certifications and Compliance
ANVISA Resolution RDC No. 105/1999; ANVISA Resolution RDC No. 326/2019; ANVISA Resolution RDC No. 56/2012; ANVISA Resolution RDC No. 91/2001; Comprehensive Environmental Response Compensations & Liability Act (CERCLA); Directive 1333/2008/EC; EC No. 2023/2006; EC No.1907/2006; MERCOSUR Resolution GMC No. 02/12; MERCOSUR Resolution GMC No. 03/92; MERCOSUR Resolution GMC No. 39/19; MERCOSUR Resolution GMC No. 56/92; Regulation (EC) No. 1334/2008; Regulation (EU) No. 10/2011 (PIM); Regulation (EU) No. 1935/2004; Regulation (EU) No. 2023/1627
- Plastics and Elastomers End Uses
- Beverage Bottles
- Bottles
- Caps
- Cosmetic Packaging
- Cosmetics Bottles
- Hygiene Packaging
- Jugs
- Rigid Packaging
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Blow Molding
- Compression Molding
- Extrusion
- Extrusion Blow Molding (EBM)
- Profile Extrusion
- Tubing Extrusion
Technical data
Table 1 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| C14 Content | min. 95 | % | ASTM D 6866 |
Table 2 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (at 190°C, 2.16kg) | 0.34 | g/10 min | ASTM D1238 |
| Density | 0.956 | g/cm³ | ASTM D792 |
Table 3 of 3
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (at 190°C, 21.6kg) | 28.0 | g/10 min | ASTM D 1238 |
| Tensile Strength (at Yield) ᵃ | 30.0 | MPa | ASTM D 638 |
| Tensile Strength (at Break) ᵃ | 30.0 | MPa | ASTM D 638 |
| Flexural Modulus (1% Secant) ᵇ | 1250.0 | MPa | ASTM D 790 |
| Tensile Impact Strength (at 23°C) | 110.0 | kJ/m² | ISO 8256 |
| Environmental Stress Cracking Resistance (Notch 0.3 mm, 50°C, 10% Igepal CO630) ᵃ | 30.0 | h/F50 | ASTM D 1693 |
| Deflection Temperature Under Load (at 0.455 MPa) ᵇ | 70.0 | °C | ASTM D 648 |
| Vicat Softening Temperature (at 10 N) ᵇ | 127.0 | °C | ASTM D 1525 |
