Vitro Minerals LA-600(1)
Vitro Minerals LA-600(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.
Properties
- Physical Form
- Powder
- Solid
Identification
Product families
- Fillers & Extenders
Other characteristics
- End Uses
2K (2 Component) Adhesive, Solventborne Adhesive, Solventborne Coating, Solventborne Sealant, Waterborne Adhesive, Waterborne Coating, Waterborne Sealant
- Functions
- Extender, Filler
- Oil Absorption
- 27.0 - 27.0 g/100 g
- Markets
- Adhesives & Sealants
- Paints & Coatings
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications; Paints & Coatings — Other Paints & Coatings Applications
- Coating Type
- Solventborne Coating
- Waterborne Coating
- Technology
- CASE Ingredients
- Packaging Type
- Bags
- Super Sacks
- Product Information
Vitro Minerals' unique processing system and true particle size classification provides consistent product quality for 7 grades (LA-300, LA-350, LA-400, LA-500, LA-600, LA-700, LA-800) with finenesses and brightness covering a range of potential applications. Under a microscope, LA Glass powder particles are transparent, angular-shaped particles with similar dimensions in the x, y and z axis.
- Adhesive & Sealant Type
- 2K (2 Component) Adhesive
- Solventborne Adhesive
- Solventborne Sealant
- Waterborne Adhesive
- Waterborne Sealant
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 2.5 | — | ASTM D-153 |
| Bulk Density | 43 | lb/ft3 | ASTM C-110 |
| Passing #325 | min. 99.9 | % | ASTM C-25 |
| d98 top size | 40 | μm | Laser interferometer |
| d50 median size | 8-9 | μm | Laser interferometer |
| Oil absorption | 27 | — | ASTM D-281 |
| pH (2) | 10.5 | — | AFS 113-87-S |
| Hardness | 5.5 | — | Moh’s Scale |
| Refractive Index | 1.51 | — | ASTM D-801 |
| Free moisture | max. 0.5 | % | ASTM C-566 |
| Brightness Y Value | 92-93 | — | PhotoVolt 577PC |
| Specific Resistance | 3500 | ohm-cm | ASTM D-2448 |
