SETALUX® 27-1590
- CASE Ingredients Features
- High Gloss
SETALUX® 27-1590, a swift-curing hydroxyl-functional acrylic oligomer, caters to 2K high solids air dry, force dry, and bake applications. Coatings formulated with SETALUX® 27-1590 demonstrate exceptional overall performance, marked by rapid curing, good pot-life, high solids, and low VOC formulation potential. This versatile resin, applicable in solventborne, 1K, and 2K coatings, as well as solventless and high-solids coatings and top coats, boasts key attributes including excellent flow and leveling, good flexibility, and early water resistance. With a focus on delivering a finish with high gloss, SETALUX® 27-1590 stands as an efficient and high-performance solution for a range of coating needs.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Automotive OEM Coatings
- Automotive OEM Coatings
- Industrial Coatings
- Metal Coatings
Product Families
- Acrylics
Other characteristics
- Brand
- SETALUX
- End Uses
1K (1 component) Coating, 2K (2 component) Coating, Solventborne Coating, Solventless & High Solids Coating, Top Coat
- Features
- High Gloss
- Compatible Substrates & Surfaces
- Metal, Plastics
- Markets
- Automotive & Transportation
- Paints & Coatings
- Appearance
- Clean Clear and Free From Extraneous Matter
- Shelf LIfe
- 3 years
- Coating Type
- 1K (1 component) Coating
- 2K (2 component) Coating
- Solventborne Coating
- Solventless & High Solids Coating
- Top Coat
- Technology
- CASE Ingredients
- Suggested Uses
Topcoats and single coat enamels for VR and Industrial applications; Maintenance and Marine coatings; Coatings for metal and plastics; Modifier for both acrylic and polyester urethane and melamine cross-linked systems
- Country Availability
- Brazil
- Canada
- Mexico
- USA
- Storage and Handling
In the original sealed containers, this product is stable for 3 years at temperatures up to 100°F.; Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.; Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.; Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
- Performance Highlights
Ability to formulate low VOC coatings (2.5 – 3.5 lbs/ gal ); Fast cure with good pot-life; Excellent flow, DOI and overall appearance properties; Very good exterior durability; Very good gloss retention; Very good modifier to reduce VOC of higher VOC systems
- Curing
Based on 100% conversion of reactive groups the following equation can be used to calculate the quantity of polyisocyanate needed for crosslinking 100 parts (insert product name) (on solids):; Polyisocyanate (f.o.d.) = 42 x 100 x OH% (solid resin) / 17 x NCO% (f.o.d.); 42 = molecular weight of the NCO-group; 17 = molecular weight of the OH-group; Anhydrous solvents as well as solvents free of hydroxyl functional groups should be used in the presence of polyisocyanates, as dilution solvents
- Compatible Substrates and Surfaces
- Metal
- Plastics
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Reduced Viscosity (70% in MAK) | N - R | Gardner -Holdt |
| Acid Value (on Solid) | max. 4 | mg KOH/g |
| Color | max. 100 | — |
| Density | 8.58 ± 0.10 | lbs/gal |
| HEW (on n.v.) | 400 | — |
| Non-Volatile Content (volume) | 74.8 | %Vol |
| Flash Point (Setaflash) | 102 | °F |
| Non-Volatile Content (weight) | 80 ± 1.0 | %wt |
| Viscosity (73°F) | Z2 - Z4 | Gardner -Holdt |
