UVEKOL® S 15
- CASE Ingredients Features
- Excellent AdhesionFaster Cycle TimeHigh Impact Resistance
UVEKOL® S 15 is the perfect choice for specialist coatings in the paint and coatings sector. This resin, which was developed especially for glass coatings and other specialized applications, streamlines the lamination procedure without requiring heating or pressure. To use, wipe the glass panes and attach them together with double-sided tape, being sure to leave a tiny gap.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Glass Coatings
- Other Specialty Coatings
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- UVEKOL
- End Uses
- 1K (1 component) Coating
- Features
Excellent Adhesion, Faster Cycle Time, High Impact Resistance
- Compatible Substrates & Surfaces
- Glass
- Markets
- Paints & Coatings
- Shelf LIfe
- 9 Months
- Coating Type
- 1K (1 component) Coating
- Technology
- CASE Ingredients
- Labeling Claims
- Bisphenol A-free
- Low Carbon Footprint (PCF)
- Solvent-free
- Special Properties
Uvekol S 15 has excellent impact resistance.. The product has been optimized for the use in safety and security glazing. Here follows an overview of the performance of laminated glass produced with the Uvekol S 15 resin.
- Storage and Handling
Uvekol should be stored in a dry place, away from sources of heat, at a temperature of 15 to 30°C.; Uvekol resins have a shelf life of 9 months from the date of manufacture.; TRANSPORT REGULATION
- Application Procedure
The lamination of glass with Uvekol resins is a simple application process, it requires no heating or pressure. The glass panes to be laminated are cleaned and joined together with a double-sided adhesive tape, leaving a small opening.. Uvekol S 15 is pumped into the cavity between the panes and then the resin is cured in an UV oven for 20 minutes (standard time for most laminating applications).
- Packaging Information
Uvekol S 15 is available in plastic drum of 180 Kg net weight and containers schütz of 1000 Kg net weight.
- Performance Characteristics
ANSI and variants – pendulum test; The most commonly used tests for safety performance are pendulum tests. In this approach, a soft body impactor (bag, tires) is swung from a standardized drop height against a vertically positioned test panel. The test simulates a person slipping and falling against a safety glass: a balustrade, banister or façade. The table below shows examples of laminate compositions meeting the respective standard.; * composition 4 / 1 / 5 means the laminate is built up 4 mm glass pane / 1mm Uvekol interlayer / 5mm glass pane; For detailed information on tests related to Security Performance and Accelerated Aging (Heat, Moisture & UV Resistance) please refer to the TDS.
- Compatible Substrates and Surfaces
- Glass
Technical data
Table 1 of 4
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Color | max. 50 | Apha |
| Hardness After Cure (21°C) | 70 | Shore A |
| Hopler Viscosity (25°C) | 75 | mPa.s |
| Refractive Index (25°C) | 1.441 | — |
| Shore A Hardness After Cure (at 21°C) | 70 | — |
Table 2 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Density | 0.998 | g/cm³ |
Эксплуатационные характеристики
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| ANSI Z.97 | BAG – 45 kg | 1219 | 548 |
| BS 6206 | BAG – 45 kg | 1219 | 548 |
Хранение и обращение
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 8°C | 2924 | 3(8), II | 3(8), II |
