90 Green™
- Chemical Family
- Methacrylates
90 GREEN™ is a medium strength , very low viscosity, wicking grade threadlocker and porosity filler. Use 90 GREEN™ on applications requiring a fast setting anaerobic product to seal and lock small screws and threaded fasteners. 90 GREEN™ is ideal in applications where additional torque can not be applied to a delicate fastener, but greater off torque is desired. Because of it’s ability to wick by capillary action, 90 GREEN™ can be applied to small fasteners that have already been assembled. It is also the perfect product for sealing porosities in welds and cast parts.
Product families
Applications
- Building & Construction — Other Building & Construction Applications
- Pipes & Plumbing
Product Families
- Anaerobic Adhesives
Other characteristics
- Brand
- 90 Green
- Features
Excellent Seal Properties, Fast Setting, Good Wicking, Low Viscosity, Medium Strength
- Product Type
- Anaerobic Adhesive
- Application Area
- Thread Sealing
- Note
3/8-16 plain finish cap screws and nuts.; Larger fasteners will increase surface area and breakaway torque.
- Markets
- Building & Construction
- Regulatory
90 Green™ meets ASTM D5363 AN0261 and Mil-S-46163 TYPE III GRADE R.
- Composition
- Anaerobic Methacrylates
- Technology
- Ready-to-Use Products
- Quality Standards
- MIL-S-46163
- Shelf Life (72°F)
- 2 years
- Certifications and Compliance
- NSF Standard 61 for Drinking Water
- Ready to Use Product Features
- Excellent Seal Properties
- Fast Setting
- Good Wicking
- Low Viscosity
- Medium Strength
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point | min. 100 | °F |
| Fluorescence | Under Blue Light | — |
| Specific Weight | 1.05 | — |
| Viscosity | 15.0 | cps |
Table 2 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Full Cure | 8 - 10 | hours | — |
| Functional Cure Time | 1 - 2 | hours | — |
| Handling | 5 | minutes | — |
| Locking Shear | 3 - 4000 | psi | — |
| Locking Torque (Breakaway) | 20 - 135 | inch lb’s | ASTM D5363 |
| Locking Torque (Prevailing) | 200 - 350 | inch lb’s | ASTM D5363 |
| Temperature Range | 200.0 | °C | — |
