To catalogue
77 Red™
- Chemical Family
- Methacrylates
77 RED™ is a very high viscosity high strength threadlocker. It should be used on large fasteners, where a high break away torque is desired. Because it is high in viscosity, 77 RED™ will not run out of the joint before it cures and can be used in applications requiring good gap filling abilities.
Product families
Applications
Applications
- Building & Construction — Other Building & Construction Applications
Building & Construction — Building Materials
- Pipes & Plumbing
Product Families
Ready-to-Use Products — Adhesives & Sealants
- Anaerobic Adhesives
Other characteristics
- Brand
- 77 Red
- Features
Good Gap Filling Capabilities, High Strength, High Temperature Resistance, High Viscosity
- Product Type
- Anaerobic Adhesive
- Application Area
- Thread Sealing
- Note
3/8-16 plain finish cap screws and nuts.; Larger fasteners will increase surface area and breakaway torque.
- Markets
- Building & Construction
- Regulatory
77 Red™ meets ASTM D5363 AN0211 and Mil-S-46163 TYPE I Grade L
- Composition
- Anaerobic Methacrylates
- Technology
- Ready-to-Use Products
- Quality Standards
- MIL-S-46163
- Shelf Life (72°F)
- 2 years
- Certifications and Compliance
- NSF Standard 61 for Drinking Water
- Ready to Use Product Features
- Good Gap Filling Capabilities
- High Strength
- High Temperature Resistance
- High Viscosity
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point | min. 100 | °F |
| Fluorescence | Under Blue Light | — |
| Specific Weight | 1.05 | — |
| Viscosity | 7000.0 | cps |
Table 2 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Full Cure | 8 - 10 | hours | — |
| Functional Cure Time | 1 - 2 | hours | — |
| Handling | 5 | minutes | — |
| Locking Torque (Breakaway) | 250 - 350 | inch lb’s | ASTM D5363 |
| Locking Torque (Prevailing) | 200 - 300 | inch lb’s | ASTM D5363 |
| Temperature Range | 200.0 | °C | — |
