Quechem Synthetic Lubricant HTL-440
Quechem Synthetic Lubricant HTL-440 has been designed to lubricate and prevent extreme loading and high temperatures for trunnion roller shafts and liners, thrust collars and roller mill bearings. It is a 100% synthetic lubricant specifically manufactured for trunnion rollers on rotary kilns and dryers.
Product families
Applications
- Equipment & Parts
Product Families
- Lubricants & Oils
Other characteristics
- Features
Cost Effective, Good Washability, High Temperature Resistance, Sludge Build-up Prevention
- Product Type
- Synthetic Lubricants
- Markets
- Industrial
- Advantages
Water washable, hot or cold.; Non-Hazardous.; Extremely stable Flat viscosity vs.Temperature curve.; Withstands shaft temperatures to 500ºF (260ºC); Operates without Water Jackets successfully.; Lower maintenance costs.; No sludge or varnish.; Runs much cooler even under high loads.; Allows ample time to remedy mechanical problems.
- Performance
HTL 440 is used throughout North America and abroad in many industries. It has a very high film strength and have taken temperatures up to 585ºF without failure. Water jackets are not necessary and offers excellent protection year round.
- Availability
- Usually ships in 24 hours.
- Technology
- Ready-to-Use Products
- Base Oil
- Synthetic Oil
- Labeling Claims
- Non-Hazardous
- Ready to Use Product Features
- Cost Effective
- Good Washability
- High Temperature Resistance
- Sludge Build-up Prevention
Technical data
Table 1 of 1
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 4-Ball Wear (20 kg) | 0.24 | mm | ASTM D-2596 |
| 4-Ball Wear (40 kg) | 0.32 | mm | ASTM D-2596 |
| Failure Load (FALEX & V-BLOCK Method) | 2500.0 | lb | ASTM D-3233 |
| Load Wear Index | 38.0 | — | ASTM D-2596 |
| Midpoint Viscosity (40°C) | 1000 | Centistokes | ASTM D-445 |
| Pour Point | -28.0 | °C | ASTM D-97 |
| SRV Step Load, # pass (50 Hz/1mm/50°C) | 1200 | — | ASTM D-2596 |
| Strip Corrosion (On Bronze #660) | No Tarnish Color | — | ASTM D-130 |
| Torque Reading (FALEX & V-BLOCK Method) | 80.0 | lb | ASTM D-3233 |
| Viscosity (16°C) | 3556 | Centistokes | ASTM D-445 |
| Viscosity (38°C) | 1107 | Centistokes | ASTM D-445 |
| Viscosity (66°C) | 409 | Centistokes | ASTM D-445 |
