To catalogue
Synergy Polymers SGR15
- Chemical Family
- Polyamides
Synergy Polymers SGR15 is a Nylon 6 glass reinforced 15%.
Product families
Applications
Automotive & Transportation — Automotive
- Other Automotive Applications
- Powertrain & UTH
Building & Construction — Building Materials
- Structural Components
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Electrical & Electronics — Devices & Assemblies
- Automotive Electronics
- Other Devices & Assemblies
Electrical & Electronics — Parts & Components
- Connectors
- Other Parts & Components
- Switches & Relays
- Terminal Blocks Plugs & Sockets
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Flexural Modulus
- 4000.0 - 4000.0 MPa
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Building & Construction
- Electrical & Electronics
- Industrial
- Features
High mechancial and thermal properties. Good weathering and Chemical resistance. Easy Processability and Mold release Good dimensional stability and reduced shrinkage.
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Dimensional Stability
- Easier Processing
- Excellent Mechanical Strength
- Good Weather Stability
- Low Shrinkage
- Processing Guidelines
Conditioning : It is advised to condition in hot water at 80-100 Deg. C for 2-4 hrs. depending upon the component thickness and as required by the subsequent process also to release internal stresses if any to avoid breakage druing further assembly.
- Plastics and Elastomers End Uses
- Bearings
- Bushings
- Electrical Connectors
- Gears
- Sockets
- Terminal Blocks
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.24 | — | ASTM D-792 |
| Mould Shrinkage | 0.5-0.8 | % | ASTM D-955 |
| Tensil Strength | 110.0 | MPa | ASTM D-638 |
| Elongation at Break | 7.0 | % | ASTM D-638 |
| Flexural Strength | 150.0 | MPa | ASTM D-790 |
| Flexural Modulus | 4000.0 | MPa | ASTM D-790 |
| Izod Impact Strength | 2021-11-25 | kg.cm/cm | ASTM D-256A |
| Heat Deflection Temperature at 18.5 kg/sq.cm. load | 175.0 | °C | ASTM D-648 |
| Heat Deflection Temperature at 4.6 kg/sq.cm.load | 200.0 | °C | ASTM D-648 |
