BECKOPOX™ EP 2340W/56WA
- CASE Ingredients Features
- Improved Chemical ResistanceImproved HardnessPrimerless
- Chemical Family
- Epoxy & Epoxy Derivatives
BECKOPOX™ EP 2340W/56WA is a liquid binder and resin within the epoxy and epoxy derivatives family, provided by CASE Ingredients. Notably APEO-free, formaldehyde-free, solvent-free, and VOC-free, it showcases enhanced chemical resistance and hardness. Tailored for the building and construction and paints and coatings sectors, its applications span decorative paints, building envelopes and roofing, and EIFS and insulation. This product, compatible with epoxies, is available as both an epoxy and waterborne coating, eliminating the need for a primer due to its primerless feature.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Decorative Paints
- EIFS & Insulation
Product Families
- Epoxies
Other characteristics
- Brand
- BECKOPOX
- End Uses
- Epoxy Coating, Waterborne Coating
- Features
Improved Chemical Resistance, Improved Hardness, Primerless
- Markets
- Building & Construction
- Paints & Coatings
- Shelf LIfe
- 180 Days
- Coating Type
- Epoxy Coating
- Waterborne Coating
- Technology
- CASE Ingredients
- Labeling Claims
- APEO-Free
- Formaldehyde-free
- Solvent-free
- VOC-free
- Country Availability
- Brazil
- Canada
- China (Mainland)
- Mexico
- USA
- Storage and Handling
At temperatures up to 25°C storage stability packed in original containers amounts to at least 180 days.; It is important to protect BECKOPOX™ EP 2340w from frost; at low temperatures it has therefore to be stored under frost proof conditions. The viscosity of BECKOPOX™ EP 2340w can drop during storage.; When handling and processing epoxy resins and hardeners, the rules and regulations established by local authorities should be observed. A Material Safety Data Sheet is available on request.
- Distinguishing Features
BECKOPOX™ EP 2340w is available as emulsion. The drying is quicker at low temperatures and elevated atmospheric moisture compared to BECKOPOX™ EP 147w.
- Compatible Polymers and Resins
- Epoxies (EP)
- Suggested Uses and Processing Information
BECKOPOX™ EP 2340w is a modified A-liquid epoxy resin that is already emulsified in water. Formulated together with adequate curing agents such as BECKOPOX™ EH 623w, EH 613w or VEH 2106w it is suited for coatings on mineral and metal substrates. The end of processing time is shown by a noticeably increase of viscosity resp. gelation in combination with BECKOPOX™ VEH 2106w.; BECKOPOX™ EP 2340w can be formulated together with solid resin dispersions e.g. BECKOPOX™ EP 384w or EP 385w to improve their hardness and adhesion to porous substrates.; Coatings with BECKOPOX™ EP 2340w show good drying at low temperatures and elevated atmospheric moisture.; MIXING RATIO AND POT LIFE; A blend of 100,0g BECKOPOX™ EP 2340w/56WA, 46,5g BECKOPOX™ EH 623w/80WA, 46,5g deionized water has a pot life at 23°C of approx. 4 hours. The termination point cannot be observed through viscosity increase or gelation when formulated together with BECKOPOX™ EH 623w/80WA. It is therefore necessary to use the material within the stated time limit.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point (Pensky-Martens) | min. 100 | °C |
| Density (20°C) | approx. 1.1 | g/cm³ |
| Dynamic Viscosity (25 s⁻¹, 23°C) | 300 - 600 | mPa.s |
| Epoxy Equivalent (Solids) | 220 - 260 | g/mol |
| Epoxy Equivalent (Form of Delivery) | 380 - 480 | g/mol |
| Non-Volatile Matter Analogue (1h, 160°C, 1g) | 54 - 58 | % |
