To catalogue
ISOTHANE 1070A
- Chemical Family
- Polyurethanes (PU)Thermoplastic Polyurethanes (TPU)
ISOTHANE 1070A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.
Product families
Applications
Applications
- Consumer Goods — Footwear; Consumer Goods — Other Consumer Goods Applications; Consumer Goods — Sports & Recreation
Automotive & Transportation — Automotive
- Fuel Systems
Building & Construction — Building Envelope & Roofing
- Waterproofing & Weatherproofing
Electrical & Electronics — Wire & Cable
- Building Wires & Power Cables
- Data Communication Cables
- Other Wire & Cable Applications
Product Families
Elastomers — Thermoplastic Elastomers
- Thermoplastic Urethanes (TPU)
Other characteristics
- Brand
- ISOTHANE
- End Uses
Cables, Consumer Applications, Footwear, Gaskets, General Purpose, Pipe Seals, Sporting Goods, Tubes
- Polymer Name
- Thermoplastic Polyurethane (Polyester based)
- Strain at Break
- 850.0 - 850.0 %
- Processing Methods
- Blow Molding, Extrusion, Injection Molding
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Technology
- Elastomers
- Material Features
- Abrasion Resistant
- Excellent Solvent Resistance
- Excellent Toughness
- General Purpose
- Suggested Applications
Seals, Gaskets, Sheets, Film, Tube, Cable, Shoe Sole, Sporting Equipment and Mechanical Goods.
- Plastics and Elastomers End Uses
- Cables
- Consumer Applications
- Footwear
- Gaskets
- General Purpose
- Pipe Seals
- Sporting Goods
- Tubes
- Plastics and Elastomers Processing Methods
- Blow Molding
- Extrusion
- Injection Molding
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 21 (3500) | Mpa (psi) | D-412 |
| Elongation at Break | 850 | % | D-412 |
| Elongation at 50% | 3 (350) | Mpa (psi) | D-412 |
| Elongation at 100% | 7 (950) | Mpa (psi) | D-412 |
| Elongation at 300% | 7 (950) | Mpa (psi) | D-412 |
| Tear Strength | 90 (530) | N/mm (lb/in) | D-624 DIE C |
Table 2 of 2
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.18 | — | D-792 |
| Hardness | 70A | Shore A | D-2240 |
