To catalogue
AnTec M03-010
- CASE Ingredients Features
- Abrasion ResistanceAnti-SettlingChemical ResistanceCorrosion ResistanceExcellent AdhesionExcellent DispersibilityExcellent FlowGood Film FormerGood Mechanical PropertiesGood PrintabilityGood Shear ViscosityHigh GlossHigh Impact ResistanceImproved Ageing ResistanceImproved HardnessProvides Good TextureSag ResistanceSalt Spray ResistanceTemperature ResistanceUV Resistance
- Chemical Family
- Barites & Barium Salts, KaolinsBarites & Barium SaltsKaolins
AnTec M03-010 is a " double 92 grade " product , a special ultra-fine calcined kaolin developed and produced , suitable for coil coatings , industrial coatings , electrophoretic paints , inks and other high-gloss coatings , as well as ultra-fine coatings . Application areas of granular products . The product undergoes high temperature heat treatment to remove the hydroxyl group and crystal water between the minerals . After a high degree of micronization treatment , it has excellent dispersion performance and extremely low sieve residue .
Properties
- Physical Form
- Powder
- Solid
Identification
- CASE Ingredients Functions
- Binder & ResinFiller
Product families
Applications
Applications
- Paints & Coatings — Other Paints & Coatings Applications
Paints & Coatings — Industrial Coatings
- Coil Coatings
- Industrial Coatings
Printing & Packaging — Printing & Inks
- Electrophotography & Electrostatic Printing
- Other Printing Applications
Product Families
CASE Ingredients — Additives
- Fillers & Extenders
Other characteristics
- Brand
- AnTec
- End Uses
Coil Coating, E-Coat & Electrodeposition, Electrostatic Ink, Powder Coating, Solventborne Coating, Waterborne Coating, Waterborne Ink
- Functions
- Binder & Resin, Filler
- Oil Absorption
- 50.0 - 55.0 g/100 g
- Markets
- Paints & Coatings
- Printing & Packaging
- Coating Type
- Coil Coating
- E-Coat & Electrodeposition
- Powder Coating
- Solventborne Coating
- Waterborne Coating
- Technology
- CASE Ingredients
- Ink and Toner Type
- Electrostatic Ink
- Waterborne Ink
- Application Methods
- Electrodeposition
- Certifications and Compliance
- FDA 21 CFR 175.390
- ISO 14001
- ISO 9001
Technical data
Table 1 of 2
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Iso Whiteness | 92±2 | % |
| Residue On 325 mesh Sieve | max. 0.002 | % |
| Moisture | max. 0.5 | % |
| True Specific Gravity | 2.63 | g/cm3 |
| Particle Content Less Than 2 Microns | 92±2 | — |
| Oil Absorption | 50-55 | g/100g |
| pH Value (28% Solid Content) | 6.0 - 7.0 | — |
| Heap Specific Gravity | 350 | kg/m3 |
| Hagman Fineness | min. 5 | — |
| Conductivity | max. 35 | μs /cm |
Table 2 of 2
8 rows| Characteristic | Value |
|---|---|
| SiO2 | 52.00 ±1 |
| Al2O3 | 45.00 ±1 |
| Fe2O3 | max. 0.50 |
| TiO2 | max. 0.80 |
| K2O | max. 0.10 |
| Na2O | max. 0.20 |
| CaO | max. 0.50 |
| MgO | max. 0.20 |
