Pyra-Sil™ 864
- Chemical Family
- Silicones
Pyra-Sil™ 864 is a one-part conformal coating that cures at room temperature. When applied, it self-levels and cures in 5 minutes (or 25 seconds @150oC) and is primarily used for sealing, potting, seam-filling, and encapsulation applications. After 24 hours of curing at room temperature, it forms a flexible yet durable seal/coat capable of effective protection against weathering, moisture, UV ray damage, and high temperatures. Incure 864 can be coated on a variety of substrates, including metals and plastics, and is suitable for manual brushing as well as high volume automatic dispensing or spraying systems.
Product families
- Protective Coatings
Other characteristics
- Brand
- Pyra-Sil
- Features
Chemical Resistant, Excellent Dielectric Properties, Good Moisture Resistance, Good UV Protection, Good Weather Stability, High Temperature Performance, Highly Versatile, Self-Leveling
- Product Type
- 1K (1 component) Coating
- Application Method
- Brush, Spray
- Compatible Substrates & Surfaces
- Metal, Plastics
- Color
- Transparent
- Markets
- Electrical & Electronics
- Storage
This product carries shelf-life of 6 months in the original, unopened packaging. For optimum results, all Pyra−Sil™ products should be stored in original containers below 22ºC (72ºF) in a cool dry place. Sealed containers in original packaging are guaranteed for 6 months when stored in the recommended temperature.
- Advantages
Incure Pyra-Sil™ one-part moisture cure silicones cure at room temperature with no curing ovens and the energy costs. Adheres to many metals, ceramics, glass, laminates and plastics. Surface cures within 5 mins and 95% strength acheived from 24 to 72hrs. Heat < 60°C (140°F) may be used to accelerate cure. Excellent physical and electrical properties over a broad range of operating conditions.
- Appearance
- Clear
- Cure
- Air Dry
- Moisture Cure
- Technology
- Ready-to-Use Products
- Chemical Type
- Urethane Acrylate, 100% Solids after full cure
- Labeling Claims
- Environmentally Friendly
- Application Methods
- Brush
- Spray
- Chemical Resistance
- Excellent
- Application Procedure
Prepared surface can be coated simply by brushing method, dipping or dispensing (for selective area coating). Products with viscosities lower than 500cP are suitable for use on spraying systems.
- Certifications and Compliance
- RoHS Compliant
- Ready to Use Product Features
- Chemical Resistant
- Excellent Dielectric Properties
- Good Moisture Resistance
- Good UV Protection
- Good Weather Stability
- High Temperature Performance
- Highly Versatile
- Self-Leveling
- Compatible Substrates and Surfaces
- Metal
- Plastics
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 325.0 | % | — |
| Hardness | 20 to 30 | Shore A | — |
| Peel Strength | 42.0 | psi | ASTM D790 |
| Service Temperature | -45 to 260 | ºC | — |
| Tensile Shear | 225.0 | psi | ASTM D1002-94 |
Table 2 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 0.99 | g/ml |
| Viscosity (rpm) | 400 - 600 | cP |
