TriPrime™
TriPrime™is a high-solids, solvent-reducible primer for iron and steel that dries quickly. It is intended for use in shop and CEM applications, as well as under all common finishes, including polyurethanes. TriPrime™ is intended for hand-cleaned iron and steel SSPC-SP1, SP2, or SP3, and provides active corrosion inhibition and undercutting protection. It is intended for HVLP and air assisted airless systems, but it can also be used with conventional or airless systems where legal. Most systems require thinning; see the instructions under "Recommended Thinning." Alkyd, silicone alkyd, and acrylic topcoats are all recommended.
Product families
- Primers & Sealers
Other characteristics
- Brand
- TriPrime
- Features
Corrosion Resistant, Fast Drying, High Solids Content
- Product Type
- Primer, Solventless & High Solids Coating
- Primer
- Solventless & High Solids Coating
- Application Method
- Brush, Roll Coater, Spray
- Compatible Substrates & Surfaces
- Iron, Metal, Steel
- Usage
Typical applications include construction and industrial equipment, structures, boxes and utility parts.
- Markets
- Industrial
- Paints & Coatings
- Coverage
Theoretical at 1 mil DFT: 1108 sq ft/gal Theoretical at 1.5 mils DFT: 738 sq ft/gal Required Minimum DFT: 2 mils
- PACKAGING
Four ea. 1 gallon cans per case: 55 lbs One ea. 5 gallon metal pail: 67 lbs
- Advantages
Compatible with epoxies and similar topcoats that may lift other primers; TriPrime (black) may also be used as a finish for wrought iron; Excellent corrosion inhibition; No critical recoat window; Very fast dry
- Order Code
TriPrime products are identified by the product series number, followed by an identifier (P=Primer) and ending in the color number. TriPrime, Primer, Red Oxide (144-52): 902P109 TriPrime, Primer, Gray (AF-7): 902P609 TriPrime, Primer, Black (B385E): 902P710
- Limitations
- Requires clean steel
- Technology
- Ready-to-Use Products
- Packaging Type
- Cans
- Pails
- Health and Safety
Caution: CAUSES IRRITATION. DO NOT INGEST. Avoid contact with eyes and skin. Wash hands thorougly after using and before eating and smoking. If spillage occurs, absorb and dispose of according to local regulations. First Aid: Should eye contact occur, flush with plenty of water for at least 15 minutes and get medical attention if vision is disturbed. For skin, wash thoroughly with soap and water. lfswallowed, seek medical attention immediately. DO NOT induce vomiting. KEEP THIS PRODUCT OUT OF THE REACH OF CHILDREN.
- Application Methods
- Brush
- Roll Coater
- Spray
- Ready to Use Product Features
- Corrosion Resistant
- Fast Drying
- High Solids Content
