To catalogue
Mafic Basalt Direct Roving 13 µm
Mafic Basalt Direct Roving 13 µm is a diameter for reinforcement of thermoplastic and thermoset polymers.
Properties
- Physical Form
- Fiber
Product families
Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
Building & Construction — Infrastructure, Roads & Paving
- Pavement Highways Roads & Bridges
Industrial — Power, Water & Utilities
- Renewable Energy
Automotive & Transportation — Transportation
- Aerospace & Aviation
Product Families
Composite Materials — Reinforcements
- Natural Materials
Other characteristics
- Reinforcement Form
- Roving
- Reinforcement Material
- Basalt Fiber
- Compatible Polymers & Resins
Epoxies (EP), Polyamides, Polybutylene Terephthalate (PBT), Polyesters, Polyethylene Terephthalate (PET), Polyethylenes (PE), Polypropylenes (PP), Polyurethanes (PU), Vinyl Esters
- Markets
- Automotive & Transportation
- Building & Construction
- Industrial
- Packing
- Internal Payout Bobbin Inner Diameter
- 160mm and 230mm
- Thermo Retractable Film-Quality ID Number
- Pallets in 40ft Container (max 18t)
- Fibre Type
- Continuous Direct Draw Basalt Filaments
- Product Info
- Mafic Basalt Direct Roving
- Technology
- Composite Materials
- Packaging Type
- Totes (IBC)
- Available Sizes
- Key Sizing Ingrediants
- De-Ionized Water Only
- Polyurethane, Polyamides, PET/PBT
- Composites End Use
- Deck Panels
- Wind Turbine Blades
- Material Features
- Chemical Resistant
- Cost Effective
- Ease of Handling
- Excellent Stiffness
- Excellent Strength
- High Energy Absorption
- High Impact Performance
- High Modulus
- Compatible Polymers and Resins
- Epoxies (EP)
- Polyamides
- Polybutylene Terephthalate (PBT)
- Polyesters
- Polyethylene Terephthalate (PET)
- Polyethylenes (PE)
- Polypropylenes (PP)
- Polyurethanes (PU)
- Composite Materials Functions
- Reinforcement
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 3100.0 | MPa | ASTM D2343 |
| Tensile Modulus | 88 - 92 | GPa | ASTM D2343 |
| Elongation at Break | 3.5 | % | — |
| Tenacity | min. 70 | cN/tex | — |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 2.63 | g/cm3 | DIN 65569 |
| Moisture Content (For all Sizing) | max. 0.1 | % | — |
| Loss on Ignition | min. 0.4 | % | — |
