Topilene® HB240TC
- Chemical Family
- PolyolefinsPolypropylenes (PP)
Topilene® HB240TC is a specially designed polypropylene block copolymer (natural colored) that features excellent stiffness & impact strength balance and enhanced thermal stability. It is suitable material for pliable corrugated conduit pipes, thermoforming sheet and injection blow molding applications. Topilene® HB240TC complies with FDA requirements in the code of Federal Regulations in 21 CFR 177.1520 for food contact.
Product families
Applications
- Waterproofing & Weatherproofing
- Other Building Materials
- Pipes & Plumbing
- Other Industrial Applications
- Food & Beverage Packaging
Product Families
- Polyolefins
Other characteristics
- Brand
- Topilene
- Polymer Name
Polypropylene Block Copolymer (PP Block Copolymer)
- Processing Methods
Extrusion, Injection Blow Molding, Injection Molding
- Color
- Natural
- Markets
- Building & Construction
- Industrial
- Printing & Packaging
- Features
Excellent stiffness & impact strength balance / Excellent impact strength at low temperature / Enhanced thermal stability / Good processability in extrusion molding
- Technology
- Plastics
- Labeling Claims
- Environmentally Friendly
- Material Features
- Cost Effective
- Excellent Stiffness
- Good Impact Strength
- Good Processability
- Heat Resistance
- High Rigidity
- Handling
This product should be stored in dry condition at temperature below 40°C and protected from UV-light. When condensation is visible or can be expected, pre-drying is recommended. (Drying condition: 80~100℃/2~4hours at air circulated condition)
- Typical Application
CD(Conbine Duct) pipes / Pliable corrugated conduit pipes / General sheet / Thermoforming sheet / Injection blow molding applications
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EU Compliant; FDA 21 CFR 177.1520; ISO 14001; ISO 9001; REACH (Europe); SVHC Compliant
- Plastics and Elastomers End Uses
- Conduit
- Corrugated Pipe
- Corrugated Sheet
- Food Packaging
- Pipes
- Thermoforming Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Blow Molding
- Injection Molding
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Index(230℃, 2.16kg) | 0.5 | g/10min | ASTM D1238 |
| Density | 0.9 | g/㎤ | ASTM D792 |
| Tensile Strength at Yield | 310 | kg/㎠ | ASTM D638 |
| Flexural Modulus | 13500 | kg/㎠ | ASTM D790 |
| Notched Izod Impact Strength(23℃ / -10℃) | N.B / 6.0 | kg·cm/cm | ASTM D256 |
| Rockwell Hardness | 85 | R-Scale | ASTM D785 |
| Heat Deflection Temperature | 109 | ℃ | ASTM D648 |
| Vicat Softening Point | 150 | ℃ | ASTM D1525 |
