ARCOR® 2211
- Chemical Family
- Epoxy & Epoxy Derivatives
ARCOR® 2211 is a highly exceptional repair composite material that stands out as the most unique option available in the market today. This formulation combines various multi-functional resin groups, fine ceramic powders, and an impressive array of 23 different additives, resulting in the ultimate weapon against erosion and corrosion. Its remarkable holding strength allows it to maintain a 3/4" thickness on vertical surfaces, while its creamy texture allows for effortless smoothing, achieving a glass-like finish. With three times the bonding strength and three times the chemical resistance compared to our closest competitor, ARCOR® 2211 outperforms other ceramic-filled rebuilding compounds. It is fully machinable and its non-slumping characteristics make it perfect for molding worn parts in place, eliminating the need for machining. Suitable for a wide range of mechanical repairs, particularly those caused by the combined forces of erosion and corrosion, ARCOR® 2211 is the go-to solution for everyday applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!
Other characteristics
- Brand
- ARCOR
- Functions
- Surface Finish
- Product Type
Repair Material, Solventless & High Solids Coating; Repair Material; Solventless & High Solids Coating
- Application Area
Condenser, Filters, Flue Gas Desulfurization (FGD), HVAC Ducts, Heat Exchangers, Hydro Wheels, Impeller, Induced Draught Fan (ID Fan) , Pipes, Pump, Scrubber, Tank Lining, Valves, Water Screens; Condenser; Filters; Flue Gas Desulfurization (FGD); HVAC Ducts; Heat Exchangers; Hydro Wheels; Impeller; Induced Draught Fan (ID Fan); Pipes; Pump; Scrubber; Tank Lining; Valves; Water Screens
- Application Method
- Air Knife Coating, Wipe
- Mixing
Thoroughly mix Activator into Base with mixing stick or drill with low speed mixing blade scraping sides and bottom of container or mixing board. Mix by Volume 2 parts Base to 1 part Activator. Or by weight 100 grams base to 55 grams activator.. Mix thoroughly to produce an even colored, streak-free material.
- Markets
- Building & Construction
- Industrial
- Clean Up
Clean tools immediately after use with M.E.K., Acetone or similar. ARCLEAN or 98+% Isopropyl Alcohol can be used in solvent restricted areas
- Mix Ratio
2:1 by Volume (Base:Activator)100 gm: 55 gm by Weight
- Shelf LIfe
- 5 Years (at 13-35ºC)
- Cure
- Chemical Cure
- Technology
- Composite Materials
- Ready-to-Use Products
- Film Thickness
- up to 500 mils vertical
- Labeling Claims
- Solvent-free
- Weight per Gallon
- 15 lbs (6.80 KG)
- Application Methods
- Air Knife Coating
- Wipe
- Composites End Use
- Condensers
- Ducts
- FGD Equipment
- Filters
- Heat Exchangers
- Hydro Wheels
- Impellers
- Induced Draft Fans
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Maximum Temperature for Immersion Service | 93.0 | °C |
| Temperature Spike Tolerance for Immersion Service (3hrs) | 110.0 | °C |
| Maximum Temperature for Dry Heat | 204.0 | °C |
| Temperature Spike Tolerance for Dry Heat | 260.0 | °C |
Table 2 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Flexural Strength | 10900.0 | psi |
| Solid Content | 100.0 | % Volume |
| Pot Life (at 72°F) | 25.0 | min/kg |
| Density | 1.48 | g/cm3 |
