ARCOR® S-26
- Chemical Family
- Epoxy & Epoxy Derivatives
ARCOR® S-26 is a solvent-free epoxy Novolac blend specifically formulated as a protective coating for metals in highly aggressive environments, particularly those characterized by combinations of chemical exposure, abrasion, and temperature extremes. It exhibits exceptional performance in a wide range of chemical substances. The ARCOR® S-26 is designed to be applied as a single coat using a spray or as a two-coat system applied by hand. It can be conveniently applied up to 30 mils per coat by hand (40 mils by spray) without experiencing slump. ARCOR® S-26 provides reliable protection for metals in demanding environments, ensuring durability and resistance against various aggressive factors. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!
Product families
Applications
- Equipment & Parts
Product Families
- Protective Coatings
Other characteristics
- Brand
- ARCOR
- Features
Abrasion Resistant, Acid Resistant, Alkali Resistant, Chemical Resistant, Good Flexibility, High Temperature Resistance, Solvent Resistant, Water Resistant
- Product Type
- Epoxy Coating, Solventless & High Solids Coating
- Epoxy Coating
- Solventless & High Solids Coating
- Application Area
Clarifiers, Pump, Secondary Containment Concrete, Tanks; Clarifiers; Pump; Secondary Containment Concrete; Tanks
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal
- Color
- Blue
- Mixing
Thoroughly mix Activator into Base with mixing stick or drill with low speed mixing blade. Mix by Volume 2 parts Base to 1 part Activator. Or by weight 100 grams base to 50 grams activator.
- Markets
- Industrial
- Clean Up
Clean tools immediately after use with M.E.K., Acetone, 98+% Isopropyl Alcohol or similar
- Mix Ratio
2:1 by Volume (Base:Activator) 100 gm : 50 gm by weight
- Shelf LIfe
- 5 Years (at 13-35ºC)
- Application
Brush: medium to stiff bristle of sufficient quality that bristles do not pull out and stick in coating (epoxy glued bristles are best). Trim or tape to <1" nap. Roller: use good quality 3/8" nap on metal, 1/2" for rough concrete. Plural Spray:0 0.031-0.045 RAC tip, 3,000-3,500 PSI, Heat to 170°F Base, 120°F Activator. Consult ARCOR for your job-specific requirements. Airless Spray:0 0.035-0.045 RAC tip, 5,000-5,800 PSI(60:1+). Recommended only with in-line heater at 120° to 135°F. (Caution: Short Pot-Life). Consult ARCOR for job-specific requirements. Conventional Spray: Not Recommended All spray equipment should employ traps to prevent water and oil from contaminating coating and 30 mesh screens prevent particulate contamination.
- Cure
- Chemical Cure
- Flexibility
Good. Very Good with Polyester or Fiberglass Mat; 1.5 oz/ft2 (.5 KG/M2)
- Technology
- Ready-to-Use Products
- Film Thickness
Hand Application 10-30 mils/ coat,(250-750 microns)Spray Application 15-40 mills/coat(375-1000 micron)
- Labeling Claims
- Solvent-free
- VOC-free
- Weight per Gallon
- 12.5 lbs (5.7 KG)
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Maximum Temperature for Immersion Service | 93.0 | °C |
| Temperature Spike Tolerance for Immersion Service (3hrs) | 177.0 | °C |
| Maximum Temperature for Dry Heat | 163.0 | °C |
| Temperature Spike Tolerance for Dry Heat (3hrs) | 260.0 | °C |
Table 2 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | 100.0 | % Volume |
| Pot Life (at 72°F) | 23.0 | min/kg |
| Coverage (7.4 m²/gal, at 20 mils, typically add 20% for waste) | 80.0 | sf/gal |
