ARCOR® 2213 Stick
- Chemical Family
- Epoxy & Epoxy Derivatives
ARCOR® 2213 Stick is a convenient, solvent-free, two-component epoxy paste packaged in an easy-to-use stick form, combining both the Activator and Base components. With a simple cut or twist, a desired amount can be easily extracted and kneaded using gloved fingers. This rapid-curing epoxy is particularly well-suited for emergency repairs, allowing for quick fixes when time is of the essence. ARCOR® 2213 exhibits corrosion resistance and is reinforced with steel for excellent wear resistance. It can be further modified to meet specific requirements as it can be sanded, drilled, tapped, filed, and machined. Furthermore, it is compatible with epoxy, urethane, or acrylic paints, offering versatility in the choice of final finishes. Choose ARCOR® 2213 Stick for its convenience, durability, and efficiency in handling emergency repairs with excellent wear resistance and a wide range of applicability. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!
Other characteristics
- Brand
- ARCOR
- Product Type
2K (2 component) Adhesive, Contact Adhesive, Epoxy Adhesive, Repair Material, Solvent free (100% Solids) Adhesive; 2K (2 component) Adhesive; Contact Adhesive; Epoxy Adhesive; Repair Material; Solvent free (100% Solids) Adhesive
- Application Area
- Pipes, Thread
- Pipes
- Thread
- Compatible Substrates & Surfaces
- Acrylic, Epoxies, Urethane Membranes
- Mixing
Thoroughly mix Activator into Base with mixing stick or drill with low speed mixing blade scraping sides and bottom of container or mixing board. Mix by Volume 2-parts Base to 1-part Activator. Or by weight 100 grams Base to 50 grams Activator. Mix thoroughly to produce an even colored and streak-free material.
- Markets
- Industrial
- Clean Up
Clean tools immediately with M.E.K., Acetone or similar. Isopropyl Alcohol(98+%) can be used in solvent restricted areas
- Mix Ratio
- 1:1 by Volume (Base: Activator)
- Plural Spray
.029-.035 RAC tip, 3,000-4,500 PSI, Heat to 160ºF Base, 120ºF Activator. Ambient Temperature and Humidity will affect temperature and pressure setting. Consult ARCOR.
- Technology
- Ready-to-Use Products
- Airless Spray
0.029-0.035 RAC tip, 4,500-5,500 PSI(60:1+). Recommended in-line heater at 120º to 135ºF (Caution: Short Pot-Life). Ambient Temperature and Humidity will affect temperature and pressure setting. Contact ARCOR. All spray equipment should employ traps to prevent water and oil from contaminating coating and screens to prevent particulate contamination.
- Labeling Claims
- Solvent-free
- Weight per Gallon
- 18.5 lbs. (8.4 KG); 4.9 lbs. (2.2 KG)/Liter
