ARCOR® EE-121 HT
ARCOR® EE-121 HT is a modified version of ARCOR® EE-121 designed to enhance temperature performance by up to 100°F (depending on the specific application). While the increased temperature resistance provides added benefits, it may exhibit slightly reduced performance in highly aggressive acidic environments compared to ARCOR® EE-121. Specifically developed for demanding chemical environments, ARCOR® EE-121 HT excels in resisting acids, methanol, ethanol, and organic solvents at elevated temperatures. The incorporation of Kevlar® fibers in the formulation results in a robust, highly cross-linked coating with exceptional flexural, thermal, and impact strength, along with outstanding wear resistance. This versatile product is suitable for use on both ferrous and non-ferrous metals as well as concrete, making it an excellent choice for immersion or non-immersion containment applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!
Identification
Product families
Applications
- Equipment & Parts
Product Families
- Top Coats
Other characteristics
- Brand
- ARCOR
- Features
Acid Resistant, Alkali Resistant, Chemical Resistant, Excellent Solvent Resistance, Good Abrasion Resistance, Good Flexibility, Good Thermal Stability, Good Toughness, High Flexural Modulus, High Impact Resistance, High Temperature Resistance, Improved Wear, Water Resistant
- Product Type
Epoxy Coating, Solventless & High Solids Coating, Top Coat; Epoxy Coating; Solventless & High Solids Coating; Top Coat
- Application Area
Floor, Flue Gas Desulfurization (FGD), Pipes, Pump, Tank Lining; Floor; Flue Gas Desulfurization (FGD); Pipes; Pump; Tank Lining
- Application Method
- Brush, Roller, Spray
- Note
Coverage:1mil = 25 micron; 1 Gal = 3.785 L; 10.77ft2 = M2
- Mixing
Thoroughly mix Activator into Base with mixing stick or drill with low speed mixing blade scraping sides and bottom of container or mixing board. Mix by Volume 3 parts Base to 1-part Activator. Or by weight 100 grams base to 31 grams activator. Mix thoroughly to produce an even colored and streak-free material.
- Markets
- Industrial
- Clean Up
Clean tools immediately after use with M.E.K., Acetone, 98+% Isopropyl Alcohol or similar
- Mix Ratio
3:1 by Volume (Base : Activator) 100 gm: 31 gm by weight
- Shelf LIfe
- 5 Years (at 13-35ºC)
- Application
Brush: medium to stiff bristle of sufficient quality that bristles do not pull out and stick in coating. Trim or tape to <1" nap. Roller: good quality 1/8" nap. ARCOR Cartridge Sprayer: Heat to 165F. Piston '3'; Tip Air '4'. Plural Spray: 0.039-0.045 tip, 3,500-4,500 PSI, Heat to 200ºF Base, 140ºF Activator. Ambient Temperature and Humidity will affect temperature and pressure setting. Consult ARCOR. Airless Spray: Contact ARCOR. All spray equipment should employ traps to prevent water and oil from contaminating coating and screens to prevent particulate contamination.
- Cure
- Chemical Cure
- Flexibility
Good; Very Good with Polyester or Fiberglass Mat; 1.5 oz/ft2 (.5 KG/M2)
- Technology
- Ready-to-Use Products
- Labeling Claims
- Solvent-free
- Weight per Gallon
- 10.4 lbs (4.7 KG)
- 1.25kg (2.7lbs.)/Liter
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Maximum Temperature for Immersion Service | 191.0 | °C |
| Temperature Spike Tolerance for Immersion Service (3hrs) | 246.0 | °C |
| Recommended Force Cure Temperature (2hrs) | 79.0 | °C |
| Recommended Force Cure Temperature (3hrs) | 149.0 | °C |
| Maximum Temperature for Dry Heat | 260.0 | °C |
| Temperature Spike Tolerance for Dry Heat | 304.0 | °C |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | 100.0 | % Volume |
| Viscosity | 100,000-150,000 | cps |
| Pot Life (at 72°F) | 15.0 | min/100gr |
| Coverage (at 1604/mils) | 1.0 | ft² / gal / coat |
| Coverage (at 149/mils) | 1.0 | m²/gal |
| Coverage (at 3785/microns) | 1.0 | m²/gal |
