ARCOR® EE-75
ARCOR® EE-75 is a solvent-free, low viscosity epoxy coating specifically designed for flooring applications, especially in chemically aggressive environments such as those with acids, caustics, or solvents. This exceptional product, ARCOR® EE-75, forms a resilient and chemical-resistant coating on a variety of surfaces including concrete substrates, asphalts, and steel. Its clear, low viscosity formulation makes ARCOR® EE-75 ideal for use with broadcast colored quartz flooring. With ARCOR® EE-75, you can achieve a durable and protective coating that withstands the challenges of chemically aggressive environments, ensuring the longevity and performance of your flooring. Experience the reliability and versatility of ARCOR® EE-75 for your flooring needs, delivering exceptional protection and resistance. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!
Identification
Product families
- Primers & Sealers
- Top Coats
Other characteristics
- Brand
- ARCOR
- Features
Acid Resistant, Alkali Resistant, Chemical Resistant, Excellent Solvent Resistance, Good Abrasion Resistance, Good Flexibility, Good Toughness, Low Viscosity, Water Resistant
- Product Type
Epoxy Coating, Primer, Solventless & High Solids Coating, Top Coat; Epoxy Coating; Primer; Solventless & High Solids Coating; Top Coat
- Application Area
- Floor
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Asphalt, Concrete, Metal, Steel
- Mixing
Thoroughly mix Activator into Base with mixing stick or drill with low speed mixing blade. Mix by Volume 3 parts Base to 2 part Activator or by weight 100 grams base to 59 grams activator.
- Clean Up
Clean tools immediately after use with M.E.K., Acetone, 98+% Isopropyl Alcohol or similar
- Mix Ratio
3:2 by Volume (Base:Activator) 100 gm: 59 gm by Weight
- Shelf LIfe
- 5 Years (at 13-35ºC)
- Application
All spray equipment should employ traps to prevent water and oil from contaminating coating and screens to prevent particulate contamination.
- Flexibility
Good Excellent with Fiberglass Mat; 1.5 oz/ft2 (.5 KG/M2)
- Technology
- Ready-to-Use Products
- Film Thickness
20 mils(.52 mm)/coat Exterior: 2 coats, Immersion: 2-3 coats
- Labeling Claims
- Solvent-free
- Weight per Gallon
- 9.1 lbs (4.13 KG)
- Application Methods
- Brush
- Roller
- Spray
- Surface Preparation
Concrete floor surfaces should be degreased if oil and grease contamination is present. Grind down all high points and protrusions with course aluminum oxide grind disks or scarrifier. Abrasive blast entire surface with open blast or BlasTrac. Hand grind or scarrify all hard to reach areas. Blast should remove all surface laitance, existing coatings and any mastics giving a clean profiled concrete. Prime all areas with 10 mils of ARCOR™ EE-75 or EE-79 followed by a 20 mil Topcoat of ARCOR™ EE-75.
- Overcoat and Cure Time
Brush or Roller re-coat between 2 and 14 hours at 77ºF (25ºC).
- Ready to Use Product Features
- Acid Resistant
- Alkali Resistant
- Chemical Resistant
- Excellent Solvent Resistance
- Good Abrasion Resistance
- Good Flexibility
- Good Toughness
- Low Viscosity
- Compatible Substrates and Surfaces
- Asphalt
- Concrete
- Metal
- Steel
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Maximum Temperature for Immersion Service | 93.0 | °C |
| Temperature Spike Tolerance for Immersion Service (3hrs) | 121.0 | °C |
| Maximum Temperature for Dry Heat | 163.0 | °C |
| Temperature Spike Tolerance for Dry Heat (3hrs) | 191.0 | °C |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solid Content | 100.0 | % Volume | — |
| Viscosity | 1,000-1,500 | cps | — |
| Pot Life (at 72°F) | 35.0 | min | — |
| Coverage | 80.0 | ft² / gal / coat | Theoretical |
