ARCOR® 8505
- Chemical Family
- Epoxy & Epoxy Derivatives
ARCOR® 8505 is a solvent-free (100% solids, 0% VOC) composite material formulated with a blend of ceramics and toughening agents, offering exceptional wear resistance and enhanced adhesion without the need for a primer. This high-performance coating is designed to be applied in a single, thick coat, even on vertical surfaces up to 1.0+ inch (25+ mm) thick. It serves as an ideal protective solution for areas in fluid flow equipment that experience high levels of wear. With its good all-around chemical resistance, it provides reliable insulation against bi-metallic corrosion, ensuring long-lasting durability. The coating exhibits excellent impact resistance and effectively withstands cavitation effects. While sharing similarities in application, look, and feel with our 2211 and EE-95 products, ARCOR® 8505 offers lower temperature limits and tailored chemical resistances, making it a versatile choice for various industrial applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!
Properties
- Physical Form
- Paste
Product families
Applications
- Equipment & Parts
Product Families
- Other Construction Chemicals
Other characteristics
- Brand
- ARCOR
- Features
Alkali Resistant, Cavitation Protection, Chemical Resistant, Corrosion Resistant, Excellent Solvent Resistance, Good Abrasion Resistance, Good Adhesion, Good Bonding Strength, Good Erosion Resistance, Good Flexibility, Impact Resistance, Improved Wear
- Product Type
- Repair Material
- Application Area
Condenser, HVAC Ducts, Heat Exchangers, Hydro Wheels, Impeller, Manways, Pipes, Propellers, Pump, Valves; Condenser; HVAC Ducts; Heat Exchangers; Hydro Wheels; Impeller; Manways; Pipes; Propellers; Pump; Valves
- Mixing
Thoroughly mix Activator into Base with mixing stick or drill with low speed mixing blade scraping sides and bottom of container or mixing board. Mix by Volume 1-part Base to 1-part Activator. Or by weight 100 grams Base to 100 grams Activator. Mix thoroughly to produce an even colored and streak-free material.
- Markets
- Industrial
- Clean Up
Clean tools immediately after use with M.E.K., Acetone or similar. ARCLEAN or 98+% Isopropyl Alcohol can be used in solvent restricted areas.
- Mix Ratio
1:1 by volume (Base: Activator) 100 gm: 100 gm by weight
- Shelf LIfe
- 5 Years (at 13-35ºC)
- Cure
- Chemical Cure
- Technology
- Ready-to-Use Products
- Labeling Claims
- Solvent-free
- VOC-free
- Weight per Gallon
- 15.4 lbs (7.0 KG)
- Surface Preparation
Steel surfaces are to be abrasive blasted with chloride free abrasive. Exterior applications to SSPC SP-10 Near White metal finish. Immersion applications to SSPC SP-5 White metal 3 to 5 mil profile. Grind flat all burrs, weld seams, radius sharp edges. Fresh blasted ferrous surfaces to be primed immediately to prevent oxidation of surface. Prime as needed.. Concrete surfaces should be degreased if oil and grease contamination is present. Degreased surface shall be high pressure washed, acid etched, and high pressure washed again so surface is clean and free of all grease, oils and surface laitance. Existing coatings should be abrasive blasted to clean concrete. Prime as needed.
- Ready to Use Product Features
- Alkali Resistant
- Cavitation Protection
- Chemical Resistant
- Corrosion Resistant
- Excellent Solvent Resistance
- Good Abrasion Resistance
- Good Adhesion
- Good Bonding Strength
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Continuous Temperature for Immersion Service | 49.0 | °C |
| Temperature Spike Tolerance for Immersion Service (3hrs) | 93.0 | °C |
| Maximum Temperature for Dry Heat | 121.0 | °C |
| Temperature Spike Tolerance for Dry Heat | 163.0 | °C |
Table 2 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compressive Strength | 16180.0 | psi | ASTM D695/7 days |
| Tensile Shear | 3850.0 | psi | ASTM D1002/steel: steel |
| Solid Content | 100.0 | % Volume | — |
| Pot Life (at 75°F) | 20.0 | min/kg | — |
| Density | 1.8 | g/cm3 | — |
| Flexural Strength | 14800.0 | psi | ASTM D790/7 days |
