ARCOR® EE-121 Prime
ARCOR® EE-121 Prime is a solvent-free, high 3.6 functionality epoxy Novolac coating specifically designed for aggressive chemical and high-temperature resistance. This exceptional coating is suitable for both immersion and non-immersion service, providing reliable protection in demanding environments. ARCOR® EE-121 Prime creates a tough, chemical-resistant coating on both ferrous and non-ferrous metals for full immersion applications and on concrete surfaces for secondary containment purposes. It is intended to be used as a prime coat as needed in conjunction with ARCOR® EE-121 or EE-121 HT, further enhancing the overall performance and durability of the system. ARCOR® EE-121 Prime is the ideal choice for achieving superior chemical resistance and high-temperature protection in various industrial applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!
Identification
Product families
Applications
- Equipment & Parts
Product Families
- Primers & Sealers
Other characteristics
- Brand
- ARCOR
- Features
Acid Resistant, Alkali Resistant, Chemical Resistant, Excellent Solvent Resistance, Good Abrasion Resistance, Good Flexibility, Good Toughness, High Temperature Resistance, Water Resistant
- Product Type
Epoxy Coating, Primer, Solventless & High Solids Coating; Epoxy Coating; Primer; Solventless & High Solids Coating
- Application Area
Floor, Flue Gas Desulfurization (FGD), Pipes, Pump, Tank Lining; Floor; Flue Gas Desulfurization (FGD); Pipes; Pump; Tank Lining
- Application Method
- Brush, Roller, Spray
- Mixing
Thoroughly mix Activator into Base with mixing stick or drill with low speed mixing blade scraping sides and bottom of container or mixing board. Mix by Volume 3 parts Base to 1 part Activator or by weight 100 grams base to 60 grams activator. Mix thoroughly to produce an even colored and streak-free material.
- Markets
- Industrial
- Clean Up
Clean tools immediately after use with M.E.K., Acetone, 98+% Isopropyl Alcohol or similar
- Mix Ratio
2:1 by Volume (Base:Activator) 100 gm: 60 gm by weight
- Shelf LIfe
- 5 Years (at 13-35ºC)
- Application
Brush: medium to stiff bristle of sufficient quality that bristles do not pull out and stick in coating. Trim or tape to <1" nap. Roller: good quality 1/8" nap. Plural Spray: 0.031-0.039 tip, 2,500-3,500 PSI, Heat to 180ºF Base, 140ºF Activator. Airless Spray: Not Recommended Conventional Spray: Not Recommended All spray equipment should employ traps to prevent water and oil from contaminating coating and screens to prevent particulate contamination.
- Cure
- Chemical Cure
- Technology
- Ready-to-Use Products
- Film Thickness
- 20 mils(.51 mm)/coat
- Labeling Claims
- Solvent-free
- Weight per Gallon
- 10.8 lbs (4.9 KG)
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Maximum Temperature for Immersion Service | 177.0 | °C |
| Temperature Spike Tolerance for Immersion Service (3hrs) | 232.0 | °C |
| Recommended Force Cure Temperature (2hrs) | 121.0 | °C |
| Maximum Temperature for Dry Heat | 260.0 | °C |
| Temperature Spike Tolerance for Dry Heat | 304.0 | °C |
Table 2 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | 100.0 | % Volume |
| Viscosity | 60,000-85,000 | cps |
| Pot Life (at 72°F) | 15.0 | min/100gr |
| Coverage | 80.0 | ft² / gal / coat |
| Roller Good Quality | 1/8" | nap |
