Acti-Tech™ Compatibilizer 11MA13
- Chemical Family
- Maleic Anhydrides
Acti-Tech™ Compatibilizer 11MA13 are based on Vistamaxx™ performance polymers grafted with maleic anhydride through a highly efficient melt-grafting process.Acti-Tech compatibilizer 11MA13 is a medium flexibility, low MFR grade among the Acti-Tech compatibilizers range. With its high viscosity, it is designed to enhance performance of a wide variety of polymer compounds and is particularly recommended for the following applications such as tie-layer material for film & sheet, adhesion promoter on metal, yarns or other polar substrates, soft compatibilizer for polar/unpolar polymers alloys, impact modifier of stiff polar engineering plastics.Due to the chemical nature of its polymer backbone, Acti-Tech compatibilizer 11MA13 is compatible with most polyolefins, i.e. PE, PP, EVA, EBA or POE.
Product families
Applications
- Automotive & Transportation — Other Automotive & Transportation Applications; Building & Construction — Other Building & Construction Applications; Consumer Goods — Other Consumer Goods Applications; Electrical & Electronics — Other Electrical & Electronics Applications; Printing & Packaging — Other Printing & Packaging Applications
- Textile Manufacturing
Product Families
- Performance Additives
- Surface Modifiers
- Performance Additives
- Surface Modifiers
Other characteristics
- Brand
- Acti-Tech
- Features
Flexible, General Purpose, High Viscosity, Impact Resistance, Low Modulus, Low Viscosity
- Functions
Adhesion Promoter, Compatibilizer, Impact Modifier
- Processing Methods
- Compounding, Extrusion
- Compatible Polymers & Resins
Ethylene Vinyl Acetate (EVA), Polyethylenes (PE), Polypropylenes (PP)
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Technology
- Elastomers
- Plastics
- Material Features
- Flexible
- General Purpose
- High Viscosity
- Impact Resistance
- Low Modulus
- Low Viscosity
- Additional Information
This material can be processed on any conventional thermoplastic processing equipment for compounding or extrusion. It can be used pure as tie-layer or in blends with a typical addition level of 4 to 15%. This material does not require drying prior to processing.
- Compatible Polymers and Resins
- Ethylene Vinyl Acetate (EVA)
- Polyethylenes (PE)
- Polypropylenes (PP)
- Plastics and Elastomers Functions
- Adhesion Promoter
- Compatibilizer
- Impact Modifier
- Plastics and Elastomers Processing Methods
- Compounding
- Extrusion
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.89 | — | ISO 1183 |
| Maleic anhydride content | min. 1.0 | % | FTIR |
| MFR (190°C/2.16kg) | 8/10 | g/min | ISO 1133 |
| Flexural Modulus | 65 | MPa | ISO 178 |
