Motul USA BAR SY 68
BAR SY 68 is a fully-synthetic high performance oil with a high Viscosity Index for rotating and reciprocating air compressors for extended oil change intervals. BAR SY 68 is a high performance industrial lubricant with applications in Automotive manufacturing, mechanical industries and plastic injections.
Product families
Applications
- Equipment & Parts
Product Families
- Lubricants & Oils
Other characteristics
- Features
Corrosion Resistant, Cost Effective, High Performance, High Thermo-Oxidative Stability, High Viscosity Index, Low Volatility, Oxidation Resistant, Wear Resistant, Wide Temperature Operating Range
- Product Type
- Oil
- Application Area
- Compressors, Reciprocating Compressors
- Compressors
- Reciprocating Compressors
- Markets
- Industrial
- PACKAGING
- Jerry Can - 20 L
- Drum - 208 L
- Advantages
Excellent wear and corrosion protection; Very long drain intervals for reduced compressor maintenance; Reduces varnish and lacquer deposits; High viscosity index; Very low volatility for lower oil consumption; High oxidation resistance; Excellent separation from air and water
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Jerrycan
- Drain Oil Interval
- Recommended drain oil interval: 8,000 hours.
- Regulatory and Standards
- BAR SY 68 meets the following requirements:
- DIN 51506 - VCL & VDL
- Ready to Use Product Features
- Corrosion Resistant
- Cost Effective
- High Performance
- High Thermo-Oxidative Stability
- High Viscosity Index
- Low Volatility
- Oxidation Resistant
- Wear Resistant
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (20°C) | 0.861 | — | ISO 12.185 |
| Viscosity (40°C) | 70.0 | mm²/s | ASTM D445 |
| Viscosity (100°C) | 9.9 | mm²/s | ASTM D445 |
| Viscosity Index | 124.0 | — | — |
| Flash Point | 250.0 | °C | ASTM D92 |
| Pour Point | -33.0 | °C | ASTM D97 |
| 4 Ball Test - Wear Scar | 0.34 | mm | ISO 20.623 |
| Foam, Seq I | 0/0 | ml/ml | NFT 60 129 |
| Foam, Seq II | 0/0 | ml/ml | NFT 60 129 |
| Foam, Seq IIII | 0/0 | ml/ml | NFT 60 129 |
| Copper Strip Corrosion | 1B | — | ISO 2160 |
| Oxidation Stability | 2066.0 | min | RBOT IP 229 |
