Dynesic Technologies SILVERSHIELD 5000X
- Chemical Family
- Epoxy & Epoxy Derivatives
SILVERSHIELD 5000X is a high grade, two part epoxy with anti corrosion resistance fillers designed for long term protection against rust and corrosion. SILVERSHIELD 5000X contains silver flake which assures a metallic silver finish even in direct sunlight. SILVERSHIELD 5000X can be applied over manually prepared surfaces to provide a primer or a top coat for corroded areas where blasting is not an option. SILVERSHIELD 5000X is easy to apply by brush, roller or sprayer to achieve a 4 to 10 mils. dry film thickness. SILVERSHIELD 5000X covers 266 square feet at 6 mils. For large surface areas SILVERSHIELD can be sprayed with a 30:1 airless or higher. You can consider SILVERSHIELD 5000X an outdoor epoxy paint which is much stronger than paints, but able to withstand UV rays without yellowing.
Product families
- Primers & Sealers
- Top Coats
Other characteristics
- Features
Corrosion Resistant, Flexible, Good Non-Yellowing Properties, Good Surface Gloss, High Solids Content, Long Term Protection, Self-Priming, UV Resistant
- Product Type
2K (2 component) Coating, Epoxy Coating, Primer, Solventless & High Solids Coating, Top Coat; 2K (2 component) Coating; Epoxy Coating; Primer; Solventless & High Solids Coating; Top Coat
- Application Area
- Pipes, Tanks
- Pipes
- Tanks
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
Concrete, Fiberglass, Metal, Stainless Steel, Wood
- Color
- Silver
- Finish
- Gloss
- Primer
- Self-priming
- Safety
Read and follow all caution statements on this product data sheet and on the SDS for this product. Wear protective clothing, gloves and use protective cream on face, hands and all exposed areas.
- Cleanup
Use MEK or Acetone. In case of spillage, absorb and dispose of in accordance with local applicable regulations.
- Markets
- Building & Construction
- Paints & Coatings
- Topcoats
- Acrylics, Epoxies, Polyurethanes
- Mix Ratio
- 3-1 Part A to Part B by volume.
- Shelf LIfe
2 Years at 75°F (24°C) *When kept at recommended storage conditions and in original unopened containers.
- Generic Type
- Zinc Rich Polyamado-Amine Epoxy
- Technology
- Ready-to-Use Products
- Ventilation
When used as a tank lining or in enclosed areas, thorough air circulation must be used during and after application until the coating is cured. User should test and monitor exposure levels to insure all personnel are below guidelines.
- Container Sizes
4x1 kg unit (53 sq.ft. at 6 mils) or 1x1 gallon kit (266sq.ft. at 6 mils).
- Labeling Claims
- Environmentally Friendly
- VOC-free
- Shipping Weight
- 1 Gallon Kit - 10 lbs. (4.55 kg)
- Recommended Uses
- Indoor / outdoor rusting and corroding surfaces.
- Pipe exterior & pipe racks.
- Support columns.
- Tank tops and tank surfaces.
- Rust inhibitor and condensation barrier.
Technical data
Table 1 of 1
21 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cure Schedule & Re-coat Window (100°F) | 2 - 4 | hours | — |
| Cure Schedule & Re-coat Window (60°F) | 10 - 48 | hours | — |
| Cure Schedule & Re-coat Window (77°F) | 8 - 24 | hours | — |
| Dry Film Thickness | 4 - 12 | mils per coat | — |
| Dry Temperature Resistance (Continuous) | 250.0 | °F | — |
| Dry Temperature Resistance (Non-Continuous) | 300.0 | °F | — |
| Dry to Touch (77°F) | 3.0 | hours | — |
| Flash Point (Hardener) | min. 200 | °F | — |
| Flash Point (Resin) | min. 300 | °F | — |
| Flexibility | min. 35 | % | ASTM D522-4 |
| Pull Off Adhesion Test | 1600.0 | psi | ASTM D4541 |
| Recommended Thickness | 6 - 12 | mils | — |
