ThermHex Waben GmbH THPP120CP820
- Chemical Family
- PolyolefinsPolypropylenes (PP)
Properties
- Physical Form
- Sandwich Panel
Product families
- Exterior & Body
- Interior
- Seating
Other characteristics
- Features
Acid Resistant, Alkali Resistant, Chemical Resistant, Cost Effective, High Energy Absorption, High Stiffness, Light Weight, Moisture Resistant, Salt Water/Spray Resistant, Shorter Cycle Time
- Polymer Name
- Polypropylene (unspecified)
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Core
- Thermoplastic Honeycomb
- Advantages
- Major cost reduction
- Significant weight saving
- High bending stiffness
- Energy absorbent
- Resistant to moisture, acids and bases
- Easy resource-friendly converting
- 100 % recyclable
- Technology
- Composite Materials
- Fire Resistance
Normally inflammable, higher grades of fire-resistance can be obtained in sandwich elements when using specialized surface modification.
- Labeling Claims
- Recyclable
- Product Families
- Composite Materials — Parts & Shapes
- Composites End Use
- Automotive Interior Trim
- Battery Housings
- Seats
- Material Features
- Acid Resistant
- Alkali Resistant
- Chemical Resistant
- Cost Effective
- High Energy Absorption
- Light Weight
- Moisture Resistant
- Salt Water/Spray Resistant
- Chemical Resistance
Excellent resistance to water, most acids, bases and salt solutions.
- Liability For Defects
All information provided herein is based on our current knowledge and experience. Due to the high number of possible influences during processing and application, the information does not release the processor from the necessity of carrying out his own investigations and tests. Information contained herein and explanations provided by ThermHex Waben GmbH In connection with this printed matter does not represent acceptance of a guarantee. Guarantee statements require special explicit written declarations on behalf of ThermHex Waben GmbH to be effective. The constitutions stated in this datasheet determine the properties of the delivery item extensively and conclusively. Application suggestions do not establish assurance of suitability for the recommended application.. We reserve the right to adapt the product to satisfy technical progress and new developments. We would be pleased to help with any enquiries including those related to special application issues. If the application for which our products are used is subject to statutory approval, the user is responsible for the procurement of such approval. Our recommendations do not release the user from the obligation of taking the possibility of impairments to third-party rights into account and of clarifying these if necessary. Furthermore we refer to our General Terms and Conditions, especially with regard to any possible liability for defects. If you are not in possession of our General Terms and Conditions we would be pleased to supply these on request.
- Certifications and Compliance
- ISO 14001
- ISO 9001
- TÜV Approved
- Ready to Use Product Features
- High Stiffness
Technical data
Table 1 of 2
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bending Stiffness (at 400 mm Span Length in 3PB Test, CD (L), MD (W)) | 590/475 | Nm | — |
| Compressive Strength (Z-direction) | 2 (290) | Mpa (Psi) | ASTM C365–57 |
| Compressive Modulus (Z-direction) | 25 - 45 (3626 - 6527) | Mpa (Psi) | ASTM C365–57 |
| Shear Strength (CD, L/MD, W) | 0.7/0.4 (101/58) | Mpa (Psi) | ASTM C273–61 |
| Shear Modulus (CD, L/MD, W) | 21/6 (3.045/870) | Mpa (Psi) | ASTM C273–61 |
| Temperature Range for Processing | -30 to +80 | °C | — |
| Temperature Range for Application | Short term to +140 | °C | — |
| Thermal Conductivity | 0.065 | W/mk | — |
Table 2 of 2
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Standard Dimensions (CD, L x MD, W) | 1.200 x 2.500 | mm |
| Sandwich Thickness | 6 - 12 | mm |
| Skin Layer Thickness | 0.5 | mm |
| Core Thickness | 5 - 11 | mm |
| Cell Size | 4 - 5 | mm |
| Weight Per Unit Area | 2.400 - 3.240 | g/m² |
| Sandwich Density | 260 - 410 | kg/m³ |
| Core Density | 120 - 130 | kg/m³ |
| Tolerances MD (Machine Direction, W) | +10/-1 | mm |
| Tolerances CD (Cross Direction, L) | +2/-1 | mm |
| Tolerances Sandwich Thickness | +/-0.3 | mm |
| Tolerances Squareness | +/-0.2 | ° |
