To catalogue
Nylene® 615SA
- Chemical Family
- Polyamides
Nylene Kosher, extrusion grade nylon 6 resin suitable for film co-extrusion applications and blown film Excellent melt stability and good melt strength Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contract
Product families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- Nylene
- Polymer Name
- Polyamide 6 (PA 6)
- Processing Methods
- Coextrusion, Extrusion, Film Extrusion
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Material Features
- Abrasion Resistant
- Food Contact Acceptable
- Good Melt Strength
- Good Toughness
- Grease Resistant
- Low Odor
- Country Availability
- Canada
- USA
- Certifications and Compliance
- Kosher
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Coextrusion
- Extrusion
- Film Extrusion
Technical data
Table 1 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Yield | 38 | MPa | ASTM D 638 |
| Ultimate Tensile Strength | 60 | MPa | ASTM D882 |
| Secant Modulus | 652 | MPa | ASTM D882 |
| Elongation | 290 | % | — |
Table 2 of 5
1 row| Characteristic | Value | Method |
|---|---|---|
| Specific Gravity | 1.12 | ASTM D 792 |
Table 3 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Point | 215 | °C | ASTM D3418 |
Table 4 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elmendorf Tear Strength | 56 | g/mil | ASTM D1922 |
Table 5 of 5
1 row| Characteristic | Value |
|---|---|
| FDA/NSF Approved | Yes |
